Bedienungsanleitung Stihl FS 460 C-M K (Seite 17 von 116) (Englisch, Spanisch)

537264

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

FS 460 C-M, FS 460 C-M L, FS 490 C-M, FS 490 C-M L

English

To cut wild growth and scrub, lower the

rotating brush knife down onto the

growth to achieve a chopping effect –

but keep the tool below waist height at

all times.

WARNING

Exercise extreme caution when using

this method of cutting. The higher the

cutting attachment is off the ground, the

greater the risk of loss of control and of

cuttings being thrown sideways.

Use the power tool like a scythe to cut

grass, i.e. sweep it to and fro in an arc.

WARNING

When cutting woody materials, use the

left side of the blade to avoid "kickout"

(blade thrust) situations.

WARNING

Improper use of a brush knife may cause

it to crack, chip or shatter. Thrown blade

fragments may seriously or fatally injure

the operator or bystanders. To reduce

the risk of injury, avoid contact with hard

or solid foreign objects such as stones,

rocks or pieces of metal.

WARNING

When cutting young saplings or other

woody materials up to 2 cm (3/4 in.) in

diameter, use the left side of the blade to

avoid "kickout" situations (see section

on "Risk of kickout (blade thrust) with all

rigid cutting blades"). Do not attempt to

cut woody material with a larger

diameter, since the blade may catch or

jerk the power tool forward. This may

cause damage to the blade or power tool

or loss of control of the power tool,

resulting in personal injury. Use a

circular saw blade for such work.

WARNING

Inspect the brush knife at regular short

intervals for signs of damage. Do not

continue working with a damaged brush

knife. Resharpen the brush knife

regularly (when it has dulled noticeably).

Using the Circular Saw Blade

Circular saw blades are suitable for

thinning brush and cutting small trees up

to a diameter of 7 cm (2 3/4 in.). Do not

attempt to cut trees with larger

diameters, since the blade may catch or

jerk the clearing saw forward. This may

cause damage to the blade or loss of

control of the power tool and result in

serious injury. Use a chain saw for such

work.

WARNING

To reduce the risk that the blade will

crack and / or break, avoid all contact

with stones, rocks or the ground.

Sharpen blades in a timely manner as

specified – dull teeth may cause the

blade to crack or shatter.

When a clearing saw with a circular saw

blade is used to cut down small trees,

STIHL recommends that the standard

deflector be removed and replaced by

the special limit stop deflector (see

chapter on "Mounting the Deflector").

This limit stop helps to keep the unit

positioned against the tree during the

cutting process. Inexperienced users

should place the left side of the stop

against the tree trunk before beginning

to cut. This will keep the clearing saw

against the tree during the cutting

operation and will reduce the risk of loss

of control and possible kickout

(described above and briefly again

below).

Before starting the cut, accelerate the

engine up to full throttle. Perform cut

with uniform pressure. STIHL

recommends that the circular saw blade

002BA509 KN

002BA067 KN

002BA214 ST

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl FS 460 C-M K Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl FS 460 C-M K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info