Bedienungsanleitung Stihl HT 133 (Seite 11 von 96) (Englisch, Spanisch)

667254

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

HT 102, HT 103, HT 132, HT 133

English

WARNING

In order to reduce the risk of personal or

even fatal injury to bystanders from

falling objects or inadvertent contact with

the moving chain of your power tool

always keep bystanders at least 50 feet

(15 m) away when the power tool is

running.

WARNING

Even though bystanders should be kept

away from the running saw, never work

alone. Keep within calling distance of

others in case help is needed.

Stop the engine immediately if you are

approached.

DANGER

Electricity can jump from one point to

another by means of arcing. Higher

voltage increases the distance electricity

can arc. Electricity can also move

through branches, especially if they are

wet. Maintain a clearance of at least

50 feet (15 m) between the pole pruner

(including any branches it is contacting)

and any electrical line carrying live

current. Before working with less

clearance, contact your electric utility

and make sure the current is turned off.

Operating Instructions

WARNING

Do not operate your power tool using the

starting throttle position, as you do not

have control of the engine speed.

In the event of an emergency, switch off

the engine immediately by pressing the

stop switch.

WARNING

To reduce the risk of cut injuries, keep

hands and feet away from the saw

chain. Never touch a moving chain with

your hand or any other part of your body.

The saw chain continues to move for a

short period after the throttle trigger is

released (inertia effect).

Accelerating the engine while the chain

is blocked increases the load and will

cause the clutch to slip continuously.

This may result in overheating and

damage to important components (e. g.

clutch, polymer housing components) –

which can then increase the risk of injury

from the chain moving while the engine

is idling.

WARNING

If the chain becomes clogged, always

turn off the engine and make sure the

chain has stopped before cleaning.

Make sure that the saw chain does not

touch any foreign materials such as

rocks, fences, nails and the like. Such

objects may be flung off and injure the

operator or bystanders, or damage the

saw chain.

WARNING

Prior to limbing, clear the working area

from interfering limbs and brush. Then,

establish an escape area away from

where the cut limbs can fall, and remove

all obstacles.

Keep work area clear – move away

fallen limbs. Place all tools and

equipment at a safe distance from the

branches being limbed, but not in the

escape area.

WARNING

Always observe the general condition of

the tree. Look for decay and rot in the

trunk and branches. If it is rotted inside,

15m (50ft)

Your power tool is not

insulated against electric

shock. To reduce the risk

of electrocution, never

operate this power tool in

the vicinity of any wires or

cables (power, etc.)

which may be carrying

electric current.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stihl HT 133 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stihl HT 133

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info