555292

Stomer SMS-1800-T Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
8
● This laser complies with class 2 according to the relevant
standard. The unit includes no servicing components.
Do not open the housing for any reason. If the unit is
damaged, have the damage repaired by an authorized
repair agent.
● Laser viewing glasses are not protective glasses against
laser radiation.
ADDITIONAL SAFETY INSTRUCTIONS FOR
CROSS-CUT AND TABLE SAWS
● Always wear eye protectors.
● Never use the equipment in the presence of fl ammable
liquids or gases.
● NEVER use the equipment when a cutting disc (and not
a saw disc) has been attached.
● Before each use, check the saw blade for small cracks
or damages. Replace a cracked or damaged blade
immediately.
● Never use saw blades made of high-speed steel (HSS).
● Only use saw blades that are recommended by the
manufacturer and that fulfi l the EN847-1 standard. Also
make sure the riving knife is not thicker than the width of
the saw cut, and that it is not thinner than the body of the
saw blade.
● Always use the accessories that are recommended by
this manual.
● Select the correct saw blade for the material must be
sawn.
● To reduce the generation of noise, always make sure that
the blade is sharp and clean.
● Only use correctly sharpened saw blades. Never exceed
the maximum speed that is indicated on the saw blade.
● Before installing the saw blade, clean the axle, the fl anges
(especially the assembly surfaces) and the hexagonal
nut. Incorrect mounting can lead to vibrations/knocking
or slipping of the saw blade.
● Wherever possible, use the saw guard and the riving
knife with every type of application, also when sawing
material in two. Always mount the saw guard according
to the instructions in this manual. Cutting operations
are those where the saw blade cuts completely through
the workpiece, such as for instance when doing
longitudinal cuts or shortening workpieces. NEVER use
the equipment with a defective saw guard, and never tie
up the saw guard with a rope or cord. Every irregularity
in the operation of the saw guard must be immediately
corrected.
● Immediately replace the saw guard and the riving knife,
after a process has been completed that required their
removal.
● Prevent that the saw comes into contact with metals, such
as nails and screws. Search for and remove all nails,
screws and other foreign materials from the workpiece,
before you start to work.
● Remove spanners, cut off pieces and the other items
from the saw table, before turning on the switch.
● NEVER wear gloves while working; the wearing of
gloves is only recommended while cutting tools are being
replaced.
● Make sure that your hands stay clear of the cutting line of
the saw blade.
● NEVER stand in the cutting line of the saw blade and
NEVER let anyone else stand in that position.
● Remove any adjusting keys or spanners before turning
on the power tool. A spanner or key left attached to a
rotating part of the power tool may result in personal
injury.
● Do not reach out too far. Keep your feet fi rmly on the
ground at all times. This will enable you retain control
over the power tool in unexpected situations.
● Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from the power
tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
● If there are devices for connecting dust extraction and
collection facilities, please ensure that they are attached
and used correctly. Using such devices can reduce dust-
related hazards.
POWER TOOL USE AND CARE
● Do not expect the power tool to do more than it can. Use
the correct power tool for what you want to do. A power
tool will achieve better results and be safer if used in the
context for which it was designed.
● Do not use the power tool if the switch cannot turn it on
and off. A power tool with a broken switch is dangerous
and must be repaired.
● Disconnect the plug from the power source before
making adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
● Store power tools, when not in use, out of the reach of
children and do not allow people who are not familiar with
the power tool or these instructions to operate it. Power
tools are potentially dangerous in the hands of untrained
users.
● Maintenance. Check for misalignment or jammed moving
parts, breakages or any other feature that might affect
the operation of the power tool. If it is damaged, the
power tool must be repaired. Many accidents are caused
by using poorly maintained power tools.
● Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
jam and are easier to control.
● Use the power tool, accessories and cutting tools, etc.,
in accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work which
needs to be done. Using a power tool in ways for which
it was not intended can lead to potentially hazardous
situations.
SERVICE
● Your power tool should be serviced by a qualifi ed
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
ADDITIONAL SAFETY INSTRUCTIONS FOR
LASERS
Warning! The laser beam potentially causes eye
damage. Do not look or stare into the laser
beam.
● During use, do not point the laser beam at people, directly
or indirectly through refl ecting surfaces.
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stomer SMS-1800-T wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info