Bedienungsanleitung Stomer SRS-1100 (Seite 7 von 28) (Deutsch, Englisch, Französisch)

555271

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Drywall sander

TECHNICAL DATA 1

OPERATION 2

INTENDED USE

Designed for sanding primed drywall construc-

tions, ceilings and walls in internal and external

applications as well as removing carpet residue,

coats of paint, coverings, adhesives and loose

plaster.

SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings

and all instructions. Failure to follow the

warnings and instructions may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future ref-

erence.

The term „power tool“ in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

MACHINE-RELATED SAFETY

INSTRUCTIONS

• This machine is designed for sanding. Please

read all of the safety information, instructions,

illustrations and descriptions delivered with

the machine. If the following instructions are

not observed, this can result in an electric

shock, ﬁ re and/or serious injury.

• Do not use this machine to perform work such

as roughing, brushing, polishing or disc sand-

ing. Performing tasks for which the machine is

not designed can create hazards and lead to

injury.

• Never use accessories that were not special-

ly developed and intended for this machine.

Just because an accessory part can be ﬁ tted

on your machine does not guarantee danger-

free operation.

• Wear personal protective equipment. De-

pending on the application, use a shield or

protective goggles. If practical, wear a breath-

ing mask, ear protectors, safety gloves and a

work apron suitable to protect against impact

or small sanding or workpiece parts. The pro-

tective goggles must be capable of blocking ﬂ

ying debris caused by the various work opera-

tions. The breathing mask or device must be

capable of ﬁ ltering particles generated during

work. Continuous exposure to loud noise can

cause loss of hearing.

• Ensure that persons standing near the ma-

chine are at a safe distance from the work

area. All persons in the work area must wear

personal protective equipment. Parts of the

workpiece or broken accessories can ﬂ y off

and cause injury outside the immediate work

area.

• Always hold the machine by the insulated

handles if you intend to perform work that

may pose a risk of cutting into hidden power

cables or your own machine cable. Contact

with live cables transfers an electric current

to metallic machine components and causes

electric shocks.

• Keep the power cable away from rotating

parts. If you lose control, the power cable

could be cut or become stuck and your hand

or arm could be drawn into the rotating parts.

• Never set the machine down until the tool has

stopped completely. Turning tools can catch

on the storage surface, causing you to lose

control of the machine.

• Never allow the machine to operate while

carrying it at your side. The rotating tool can

catch on your clothing by accident and cause

serious cutting injuries.

• Clean the air vent slits on your machine on a

regular basis. The cooling air fan sucks the

dust into the machine and excessive deposits

of metal dust can result in electrical hazards.

• Never operate the machine near combustible

materials. Sparks can ignite these materials.

• Never use tools that have to be liquid-cooled.

Water and other liquid coolants can cause po-

tentially fatal electric shocks.

Cause and prevention of kickbacks

A kickback is a sudden reaction to jamming or

catching of a rotating disc, a support plate, a

brush or other accessory. Jamming or catching

results in a rapid standstill of the rotating acces-

sory, whereby, as a counter-reaction, an out-of-

control machine is accelerated around the jam-

ming point in a direction of rotation opposed to

the accessory.

If, for example, a sanding disc is jammed or

caught by the workpiece, the disc circumfer-

ence can dig into the workpiece surface at the

jamming point, causing the disc to be expelled.

The disc can either ﬂ y towards or away from

the user, depending on the direction of rotation

of the disc at the jamming point. This can also

cause sanding discs to break. A kickback is the

result of misuse of the machine and/or incorrect

method of work or operation and can be avoided

by closely observing the following precautionary

measures.

• Always hold the machine ﬁ rmly and position

your body and arms such that you can control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stomer SRS-1100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info