Bedienungsanleitung Stomer SRS-1100 (Seite 8 von 28) (Deutsch, Englisch, Französisch)

555271

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

any kickback force. Always use the auxiliary

handle, if included in the delivery, to ensure

optimum control over kickbacks or reaction

torques during start-up. The user can control

reaction torques or kickbacks if suitable pre-

cautionary measures are taken.

• Never place your hands near rotating tools.

Tools can kick back over your hand.

• Never position your body in the area in which

the machine moves in the event of a kickback.

A kickback accelerates the machine in the di-

rection of rotation opposed to the disc at the

jamming point.

• Take extra care when working in corners, on

sharp edges, etc. Avoid kickbacks and pre-

vent the tool from seizing. Corners, sharp

edges or a jump back tend to cause the ro-

tating tool to catch, thus leading to a loss of

control or a kickback.

Special safety instructions for ﬁ ne sanding

• Do not use excessively large sanding discs

when ﬁ ne sanding. Observe the speciﬁ cati-

ons of the manufacturer when selecting abra-

sive discs. A sanding disc that is too large and

protrudes over the sanding pad represents a

cutting injury hazard and can cause catching,

disc tears or kickbacks.

Additional warning notes

• Hold the machine ﬁ rmly with both hands and

assume a stable stance when performing

work. Hold the machine with both hands to

guide more securely.

• If potentially explosive or self-igniting dust is

produced during sanding, the processing in-

structions of the material manufacturer must

be observed under all circumstances.

• Harmful/toxic dusts can be produced during

your work (e.g. lead-containing paint, some

types of wood and metal). Contact with these

dusts, especially inhaling them, can represent

a hazard for operating personnel or persons

in the vicinity. Comply with the safety regula-

tions that apply in your country. Connect the

electric power tool to a suitable extraction

system. To protect your health, wear a protec-

tive mask.

• Never use machines with a damaged cable.

Do not touch damaged cables and pull the

plug from the mains power supply if the cable

becomes damaged during work. Damaged

cables increase the risk of electric shock.

ELECTRONICS

The machine features full-wave electronics with

the following properties:

Smooth start-up

The electronically controlled smooth start-up

function ensures that the machine starts up

smoothly.

Speed control

You can regulate the rotational speed steplessly

between 1500 and 2100 rpm using the adjusting

wheel. This enables you to optimise the cutting

speed to suit the respective material.

Constant speed

The preselected motor speed remains constant

through electronic control. This ensures a uni-

form cutting speed even when under strain.

CHANGING SANDING PADS

• Insert an Allen key into the Allen screw on the

sanding pad.

• Hold the sanding pad securely and turn the

Allen key to release.

In order to further ensure optimum axial run-

out, you must ﬁ rst clean the bearing surface

for the grinding disk on the driveshaft.

• Attach the new sanding pad.

• Tighten the screw.

Only attach speciﬁ ed sanding pads to the

machine.

AFFI XING ABRASIVES

Compatible sanding discs are quick and easy to

attach to the sanding pad. Simply press the self-

adhesive sanding discs onto the sanding pad.

The adhesive coating holds the sanding pad

securely in position. Make sure that the sanding

disc holes line up with the suction holes. Tear off

the sanding disc when worn.

ADJUSTING THE SUCTION POWER

You can adjust the suction power to match the

surface type, but only when internal extraction

is active.

• Use the adjusting wheel to adjust the suction

power.

• Start with a low suction power and slowly in-

crease until you can feel that the application

pressure has noticeably changed.

A high suction power makes sanding work on

ceilings and walls less tiring.

DUST EXTRACTION

CAUTION! Breathing in dust can dam-

age the respiratory passage!

• Always connect the machine to a dust extrac-

tor.

• When performing work that generates dust,

always wear a dust mask.

OPERATION

• Connect the machine to the mains power sup-

ply.

• Switch on the machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stomer SRS-1100 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info