Bedienungsanleitung Stromer ST2 - 2020 (Seite 24 von 44) (Englisch)

780318

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

24 25

Changing the battery externally, outside

the S-Pedelec

CR245 charger

1. Connect the charger to the power mains. The

integrated LEDs light up in red and green.

2. Now connect the Stromer charger to the bat-

tery. The LEDs in the charger light up in or-

ange and green during the charging process.

If the LEDs ﬂash red, the charging tempera-

ture is above the authorized range. When the

battery is fully charged, the LEDs light up

green.

3. Separate the battery from the charger and

then the charger from the mains connector.

Charger CR246

1. Connect the charger to the power mains.

2. Now connect the Stromer charger to the bat-

tery. The LED in the charger ﬂashes green dur-

ing the charging process. If the LED ﬂashes

red, the charging temperature is above the

authorized range. If the LED lights up in red,

there was an error during the charging pro-

cess. When the battery is fully charged, the

LED lights up green.

3. Separate the battery from the charger and

then the charger from the mains connector.

Charging the battery internally, in the

S-Pedelec

The connection for the charging cable is located

on the left side of the down tube, slightly below

the connection to the head tube.

Charger CR245

1. Connect the charger to the power mains. The

integrated LEDs light up in red and green.

2. Open the cover of the charging socket Con-

nect the Stromer charger to the Stromer. The

LEDs in the charger light up in orange and

green during the charging process. If the LEDs

ﬂash red, the charging temperature is above

the authorized range. When the battery is

fully charged, the LEDs light up green.

3. Separate the battery/Stromer from the charger

and then the charger from the mains connector.

Charger CR246

1. Connect the charger to the power mains.

2. Open the cover of the charging socket. Connect

the Stromer charger to the Stromer. The LED in

the charger ﬂashes green during the charging

process. If the LED ﬂashes red, the charging

temperature is above the authorized range. If

the LED lights up in red, there was an error dur-

ing the charging process. When the battery is

fully charged, the LED lights up green.

3. Separate the battery/Stromer from the charger

and then the charger from the mains connector.

Charging duration

The charging time may vary according to the ver-

sion and the model of the battery and the charger.

Accurate charging times are provided in the infor-

mation at www.stromerbike.com/service.

Charging status indicator

The driving display provides the option of track-

ing the battery charge status of your Stromer. The

battery charge status is shown in the form of a bar

and a percent value. The Stromer automatically

switches off the motor and changes to bicycle

mode (no support) when the battery is empty.

The bar above the battery charge status indicates

the current energy ﬂow. The display helps to ride in

an energy-saving way with a large driving range.

The longer the bar, the higher the energy ﬂow.

The bar points from right to left as soon as the mo-

tor provides support.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stromer ST2 - 2020 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stromer ST2 - 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info