Bedienungsanleitung Stromer ST2 - 2020 (Seite 26 von 44) (Englisch)

780318

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

26 27

• Open live parts should only be maintained and

cleaned at a Stromer dealer!

• Remove the battery before cleaning your

S-Pedelec. Ensure that the battery box is again

completely closed.

• Ensure that you do not touch and thus possibly

connect contacts when cleaning the battery.

You risk being hurt and the battery may suffer

damage if the contacts are live.

• Cleaning with a high-pressure cleaner may

damage the electrical system. The high pres-

sure might also push cleaning liquid into

sealed parts and thus damage them.

• Avoid damage to cables and electrical compo-

nents. When this has happened, the S-Pedelec

must be deactivated until it has been inspected

by a Stromer dealer!

Switch off the electrical system, remove the

battery and close the battery box before perform-

ing any kind of work on your S-Pedelec.

Chain / Drive

Chain system

The drive chain must be regularly cleaned and

lubricated to ensure appropriate functioning (see

the “Deadlines and inspection work” section). Dirt

can be removed with the normal S-Pedelec wash.

Otherwise you can clean the chain by rubbing

it with an oily cloth. When the chain is clean, it

should be greased at the joints with suitable lubri-

cant. After being left to soak, the excess lubricant

should then be removed.

Chain tension

To ensure that the chain and gears can work safe-

ly, the chain must have a certain level of tension.

Otherwise it can come off and lead to a fall. Chain

gear systems tense the chain automatically.

Dirt and permanent strain wear the chain.

The chain should be replaced as soon as it can be

signiﬁcantly lifted (approx. 5 mm) from the front

chain ring with your ﬁngers.

Chain OK

Chain worn

Many modern chains for derailleur gear systems

no longer have chain connectors. Special tools

are required to open/exchange/close them. They

should be exchanged by a Stromer dealer.

Other chains are supplied/mounted with chain

joints. In some cases, these can be opened with-

out the need for tools. These chain connectors can

also be used to repair a damaged chain on a ride,

if they have the correct width for the drive train.

Belt drive

Your ST2 is equipped with a belt drive (Gates car-

bon belt drive). The automatic tensioning roller

saves you from having to check and retensify the

belt, making it almost maintenance free.

Please refer to the following handling in-

structions to extend the belt’s lifespan. Improper

handling can cause damage to the belt which may

mean it needs replacing!

• Do not bend or twist it.

• Do not turn it inside out.

• Do not bunch or coil it.

• Do not use as a belt whip

• Do not use tools or sharp instruments when

handling the belt.

• Do not push down onto the belt pulley.

• Do not oil.

In order to extend its lifespan, we recommend

cleaning the belt with water or a hand brush after

riding through mud or dirt. Residue on the belt

or belt pulleys can result in increased wear and

noise such as squeaking or creaking.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stromer ST2 - 2020 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stromer ST2 - 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info