PART 3 • English
66
5.1.3 The Timer Menu
The timer can automatically switch on or off your receiver at any time. This enables you
for example to record programs with your VCR while you are not at home. It also can be
used to wake you up at the time you set it. Please apply the following steps:
1. Press the Menu button. <Please see inside cover Screen 1>
2. Using UP/DOWN keys on your remote, select “Timer” and press OK. <Please
see inside cover Screen 10>
Timer number: You can select up to 8 different events.
Timer State: Set to “Enable” to use the timer function, or “Disable” to
stop the timer functions of the timer number you selected.
Timer mode: You can select the following functions in the timer mode.
1. “Power On”: The receiver powers on at the designated date and time.
2. “Time interval”: The receiver switches on at the designated date
and time, displays the channel and then switches off at the
designated date and time (The value set at the ending time).
3. “Power Off”: The receiver powers off at the designated date and time.
Timer Cycle: You can set the cycle of the action designated in the timer
mode (one time, Every Day or Every Week).
Date: You can set the starting date of the timer action.
Time: You can set the starting time of the timer action.
Ending Time: You can set the ending time of the channel view when the
Timer mode is on Time Interval.
Channel: You can select the channel to be shown when the receiver timer
mode Powers ON.
Press OK, now you will see the channel list, select a channel and Press OK.
3. Press the Red button to save and proceed with another timer event.
4. Press the Green button to save and exit the timer menu.
5. Press the Yellow button to exit the timer menu WITHOUT saving the settings.
Tip:
You have to select the channel, starting time, and ending time settings if the Timer
mode is “Time interval”. An error message will appear if any of the settings are incorrect.
