Bedienungsanleitung Strong srt 6004 (Seite 13 von 23) (Englisch)

424658

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

PART 1 • English

OK, the program name dialog will shown as below.

Use the LEFT/RIGHT buttons to move the cursor to the character you wish to edit. Use the UP/

DOWN buttons to change character (scroll alphabet). If you wish to delete character you have to

replace it with “space” character. When editing is complete, press the

OK button.

Move channel

Press the UP/DOWN keys to point the focus of the menu to the channel of your selection. Press

the LEFT/RIGHT keys to point the focus of the menu to the column “Move”. When the focus is on

column “Move”, press the OK button to conﬁrm selection of the channel, using the UP/DOWN

buttons move the channel to its new location and press the OK button to conﬁrm the new location.

Repeat this for every channel that you want to move.

Delete channel

Press the UP/DOWN keys to point the focus of the menu to the channel of your selection. Press the

LEFT/RIGHT keys to point the focus of the menu to the column “Del”. When the focus is on column

“Del”, press the OK button to mark the channel as selected to be deleted from the list. To apply the

changes press the EXIT button and conﬁrm the channel’s deletion.

Delete All channels

To delete all channels from current satellite press BLUE button (Dell All). You will be asked to conﬁrm operation.

5.1.2 Favourites Manager

Press the UP/DOWN keys to select the channel. Press the LEFT/RIGHT keys to point the focus to

the favourite group. Press the OK button to add the selected channel to the Favourite group. To

remove the channel from the favourite group, repeat same operation.

5.2 Installation

The installation menu contains three sub-menus; “Antenna Installation”, “Auto Scan” and

“Manual Scan”.

5.2.1 Antenna Installation

You can add a satellite, edit a satellite and delete a satellite in this menu.

Add satellite

If you want add a new satellite, press the RED key in this menu, a satellite list will appear on the

screen. Press RIGHT/LEFT to select the satellite. If the satellite does not exist in the satellite

list, please select “NEW SAT1”. After selection of a satellite from the satellite list, the Conﬁgure

Antenna menu will appear, please set the LNB Type, LNB Low Freq, LNB High Freq, Band control,

Polarisation control, DiSEqC Switch and Antenna mode. Further steps of installation are described

in 4.2.

Edit satellite

If the parameters of the satellite were changed or the satellite is a new satellite, you must set the

parameters of the satellite, such as LNB type, LNB low Freq, LNB High Freq, Transponder, LNB

Power, 22k Tone, DiSEqC and Antenna Mode. Sequence of editing of satellite parameters is same as

sequence of “Add satellite” described in 4.2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong srt 6004 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong srt 6004

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info