PART 1 • English
8
3.0 Connections
3.1 Connecting to your TV & VCR
Warning:
If you are not sure how to connect your receiver, do not take the risk of doing it yourself. Ask your Strong dealer to do it for you.
They are specially trained by our technicians and can get the best performance out of your receiver. Although there are entechnologies,
and requires specialised equipment. Do not hesitate to ask any questions you have to your Strong dealer about installing your
receiver.
It is possible to connect the receiver through the use of UHF coaxial cables, SCART cables, and/or so called Audio/Video cables
with RCA connectors.
3.1.1 Basic connection with a coaxial cable (Please see inside cover Figure 4)
Connect the satellite signal from the LNB to the LNB IN connector.
Connect the To TV connector at the back of the receiver to the ANT IN connector on your TV set.
Optional: connect a UHF coaxial or cable coming from your antenna or cable TV to the ANT input connector at the back
of the receiver.
3.1.2 Basic connection with a Scart cable (Please see inside cover Figure 5)
Connect the satellite signal from the LNB to the LNB IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in connector on your TV set.
Optional: connect a UHF coaxial or cable coming from your antenna or cable TV to the ANT input connector at the back
of the receiver.
3.1.3 Advanced connection (Please see inside cover Figure 6)
Connect the satellite signal from the LNB to the LNB IN connector.
Connect the TV scart connector at the back of the receiver to the scart-in connector on your TV set.
Connect the VCR scart connector at the back of the receiver to the scart-in connector on your VCR set.
Connect a UHF coaxial or cable coming from your antenna or cable TV to the ANT input connector at the back of the receiver.
Connect a coaxial cable to the TV/VCR connector at the back of the receiver. Connect the other end of this coaxial cable to
the ANT IN connector of your VCR.
Connect the TV OUT connector of your VCR to the ANT IN connector of your TV set with a coaxial cable.
Note:
If you have a digital audio amplifier with a digital audio input, use the S/PDIF output.
3.1.4 Connection with Audio Cable RCA Connectors (Please see inside cover Figure 7)
On the back of your receiver you will find the RCA connectors (Audio Left & Right - Red& white, Video - Yellow).
Install an audio/video cable between the RCA connectors of the receiver and those of your TV set or amplifier.
3.1.5 Connection to a digital audio amplifier using the S/PDIF output
(Please see inside cover Figure 8)
Connect the S/PDIF out connector on the back of your receiver to the S/PDIF input connector of your digital amplifier,
using a coaxial cable.
Do not forget to turn the S/PDIF function on (Main menu > Installation >PIN code > TV/VCR Settings > SPDIF
Output > On).
