Bedienungsanleitung Strong SRT 6511 (Seite 9 von 15) (Englisch)

480579

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

PART 1 • English

4.1 Language Selection

Press pq buttons to choose your language, press OK to conﬁrm. In case of German selected, there is an extra option

available of preset antenna conﬁguration with ASTRA 19.2E (LNB1) and HOT BIRD 13.0E (LNB2) through DiSEqC switch. In

Czech the conﬁguration ASTRA 19.2E (LNB1) and ASTRA 23.5E (LNB2) is available.

4.2 Audio Language Selection

Select your preferred Audio language using the pq buttons and press OK to conﬁrm. If you have pressed OK by mistake or

conﬁrmed a wrong setting you can use the GREEN (Back) button to get one step back at every step of Setup Wizard.

4.3 Time Zone adjustment

Select your Time Zone according to the region you live using the pq buttons. For Summertime use the tu buttons to

select the correct setting, then press OK to conﬁrm.

4.4 Satellite conﬁguration

Select one of the available connection types: Fixed dish, DiSEqC1.2 or GOTO X Settings, using the pq buttons, according to

your used dish installation. Depending on the selected Installation you will be guided to different Setup steps.

4.4.1 Fixed dish

Now you have the possibility to install your channels from the connected Antenna/s. For manually installation select Search

Channel with the pq buttons in case you are connected to single dish and want to setup e.g. ASTRA 19.2E or HOT BIRD

13E. In this case you are guided to Antenna Setting/s and have to setup your Satellite manually, for details refer to chapter

5.1.1 Antenna Setting/s.

Select mySAT if you have connected a single dish or multiple ﬁxed dishes and want to install automatically. Select RED (Single

Dish) or YELLOW (Multiple Dish). Now the receiver starts process to detect the correct satellite/s. Once ﬁnished your receiver

shows the found satellite/s & you can execute a channel search on it/ them with RED to Scan ALL channels or GREEN to Scan

Free channels.

4.4.2 DiSEqC 1.2

You are now guided directly to menu Antenna Setting/s >Motor setup which gives you the possibility to point the dish to

correct position. Use the pq and tu buttons to select and change the settings, for details refer to chapter 5.1.1 Antenna

Setting/s under point GOTO X.

4.4.3 GOTO X Settings

If you have selected this conﬁguration, then you need to select your country from the list using the pq buttons. If your

country is not available you have to choose User deﬁne where you can insert the correct position for your longitude angle and

direction, latitude angle and direction and the rotating speed.

5.0 MAIN MENU

All the important settings and features of your receiver can be operated in Main Menu. The Main Menu consists of following

sub-menus: “Installation”, “Program setting”, “User Preference”, “System Setting” and “Utility”.

Press MENU buttons in no-menu state to enter MAIN MENU.

5.1 Installation

The installation menu contains following sub-menus: “Antenna Setting/s”, “Edit Satellite data”, “Remove Satellite”, “Satellites

search”, “Manual TP Search” and “mySAT Search”.

5.1.1 Antenna setting/s

Press OK button to enter Antenna Setting/s menu.

Satellite: Here is the ﬁrst pre-stored satellite shown. Use the u button and pq buttons to select another satellite from the

list, press OK to conﬁrm.

Transponder: If you change the satellite, the transponder table will be changed automatically. Use the u button and

pq buttons to select a transponder from the corresponding satellite, press OK to conﬁrm.

LNB frequency: Default conﬁguration is set to Universal, if another LNB is used set the frequency accordingly to the used

LNB or deﬁne yourself > User deﬁne.

22 kHz: This conﬁguration is preset to Auto, because this is the most usual setting for Universal LNB’s, in case

your LNB requires another setting you can switch it permanently ON or OFF by using the tu buttons.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 6511 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info