Bedienungsanleitung Strong SRT 6511 (Seite 10 von 15) (Englisch)

480579

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

PART 1 • English

English

DiSEqC: If your antenna is connected through a DiSEqC switch and you have already executed the First Installation

with mySAT search then this setup is already according your installation. You only need to specify the

DiSEqC input in case it has been wrong conﬁgured or the installation setup has changed. Use the tu

buttons to select the correct setting, press OK to conﬁrm.

GOTO X settings: Here you can setup your location in order to use GOTO X type of Positioner.

Motor: If you use a motorised dish (DiSEqC 1.2 or DiSEqC 1.3) set DiSEqC1.2 or GOTO X, if not then set to

Disable by using the tu buttons.

nDiSEqcC1.2

Almost same like GOTO X, but without function of go to position X. For settings please see

below description.

nGOTO X:

Set motor to GOTO X and press OK to enter the menu to adjust the direction of the dish

pointing to the selected satellite.

Position Auto: Press tu buttons, the dish will be moved to West/East continuously, it will stop until it ﬁnds the best

signal.

Move dish: Press tu buttons, the dish will be moved to West/East to search the best signal, release the button will

stop the moving.

Fine Tuning: Set the ﬁne tuning, for optimised adjustment.

Move step: Move to East or West stepwise.

Limit set: Disable or enable West or East limit, for mechanical limit.

NOTE: In order to avoid mechanical damage of your dish please, make sure those mechanical limits in your motor are

set correctly and dish would not hit any objects on its movement.

Store position: Press OK button to save the current position you searched.

Go to position: Press OK button to move the dish to the stored position.

Go to Reference: Press OK button to move the dish to 0.0 >reference position.

Go to X.X: Press OK button to move the dish to exact position of the satellite

FTA only: Use the tu buttons to select YES if you want to search only for Free-To-Air channels and NO if you want

to search for scrambled channels as well.

Start Search: Use the tu buttons to select the scan mode for Transponder, Satellite or Advanced Scan.

5.1.2 Edit Satellite data

Dependent on the focus you set with the tu buttons you can edit a satellite or its transponder data. Select a satellite or

transponder with the pq buttons and press OK to enter the menu, then PIN-code (default: 0000) is requested.

In case you have chosen satellite, the following possibilities are available: Rename, Delete, Move, Add.

Rename: Now you can use the tu and pq buttons to choose characters from the shown keyboard, press OK to

insert. Press GREEN (Back) button to delete character and use the RED (OK) button to conﬁrm the new

name.

Delete: This will delete the selected satellite. A message will appear, press OK if you want to delete the satellite or

EXIT to cancel.

Move: Here you can move the position of the selected satellite in the satellite list. Use the numeric buttons to

enter new position.

Add: Use the numeric buttons to enter orbital position of the new satellite and tu to select between East or

West.

In case you have chosen transponder these possibilities are available: Delete, Edit, Add.

Delete: This will delete the selected transponder.

Edit: Use the numeric buttons to enter the new value for the selected Frequency and Symbol rate and use the

tu buttons to select the correct Polarisation and FEC.

Add: Like described above, but this will add a new transponder.

5.1.3 Remove Satellite

Here you can remove an installed satellite from the list. Use the pq buttons to select the satellite you want to remove, press

OK to enter the menu, then PIN-code (default: 0000) is requested. After entering the PIN-code the satellite is marked with X

to delete. You can select other satellites to remove or press EXIT. You will be asked for conﬁrmation to delete (OK) or cancel

(EXIT).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 6511 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info