Bedienungsanleitung Strong SRT 7000 (Seite 16 von 25) (Englisch)

480531

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

PART 1 • English

English

After conﬁguring press OK or BLUE again to start scanning with the selected settings.

Your receiver will now perform an automatic channel search with scan progress shown on screen. During

channel search you can skip Transponders by pressing MENU button, or quit the scan process by EXIT.

Once the process is ﬁnished, all found channels will be stored and the receiver will switch to the ﬁrst

found channel.

Multi-Satellites Scan: When using a multi feed antenna with more than 1 LNB, select the satellites

your antenna is adjusted for by OK button. The selected satellites will be

marked by the symbol “z“. Set in the DiSEqC point the appropriate LNB

numbers and press BLUE for Scan. A window with scanning settings will be

displayed. After conﬁguring the settings like explained in Single Satellite Scan

above, press OK or BLUE again to start Multi-Scan on all selected satellites.

Scanning by transponder (Manual Scan)

Press GOTO for displaying the transponder list of the focused satellite. By pressing GOTO again you

switch back to the satellites list.

Single Transponder Scan: Use pq buttons to highlight the transponder your wish to scan. Press BLUE

for Scan. A window with scanning settings will be displayed. After conﬁguring

the settings (explained in 7.3.1.3 above), press OK or BLUE again to start

scanning on focused transponder. Once the scan process is ﬁnished, all found

channels will be stored and the receiver will switch to the ﬁrst found channel.

Multi-Transponder Scan: Select the transponders you want to scan by OK button. The selected

transponders will be marked by the symbol “z“. Press BLUE for Scan. A

window with scanning settings will be displayed. After conﬁguring the settings

like explained in 7.3.1.2 above, press OK or BLUE again to start Multi-Scan on

all selected transponders.

7.3.1.4 Satellite Edit options

Add satellites: Press RED to add a new satellite. In new opened menu enter the satellite’s

name and position by using Navigation and Numeric buttons. In the appeared

key table select a character by using the navigation buttons. Press OK to

choose the character. Once you ﬁnish inputting the new name, navigate to

“OK” button on screen and press OK on the remote control to conﬁrm the

new name.

Save the settings with OK or cancel by EXIT.

Edit satellites: Press GREEN to edit the focused satellite. For changing settings see

explanation above. Conﬁrm changes with OK or cancel by EXIT.

Delete satellite: Press YELLOW to delete the focused satellite. Press OK to conﬁrm deleting or

EXIT to cancel it.

7.3.1.5 Transponder Edit options

Add transponder: Press RED to add a new transponder. In new opened menu enter the

transponder´s data by using Navigation and Numeric buttons. Conﬁrm the

settings with OK or cancel by EXIT. An existing TP cannot be stored again

under the same satellite.

Edit transponder: Press GREEN to edit the focused transponder. In new opened menu enter the

new transponder´s data by using Navigation and Numeric buttons. Conﬁrm

changes with OK or cancel by EXIT.

Delete transponder: Press YELLOW to delete the focused transponder. Press OK to conﬁrm deleting

or EXIT to cancel it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7000 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info