Bedienungsanleitung Strong SRT 7300 CI plus (Seite 15 von 23) (Englisch)

568532

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

PART 1 • English

Once all settings are made, press EXIT to leave the Language menu. A conﬁrmation banner will be

shown. Press OK to save your settings or EXIT to discard.

7.2.2 Output Options

This is the menu to conﬁgure the audio and video outputs of your receiver. Use pq to highlight the

setting you wish to change and tu to change the value of the highlighted setting. Press OK for a list

with all available options for the chosen setting.

TV Standard: Set the standard corresponding to your TV set. Available options are: Auto,

NTSC, PAL and SECAM.

Aspect Ratio: Use this option to set the aspect ratio of your TV set. Available options are: 4:3

and 16:9.

Conversion mode: Use this option to set the preferred way of converting 16:9 broadcasts to 4:3 TV

format. You can choose between the following options: Letter-box (the full 16:9

picture will be displayed on your 4:3 TV set with black bars above and below the

picture.), Pan and scan (The centre of the 16:9 picture will be displayed full-screen

on your 4:3 TV) and Combined (Combination of Letter-box and Pan and scan.)

SCART Mode: Select RGB for the best picture quality or CVBS in case your TV doesn’t support RGB.

Digital Audio: Deﬁnes the format available on the S/PDIF output of your receiver. When set

to PCM, the digital output will always output PCM stereo regardless of the

broadcasted audio format. The Auto setting will pass all incoming digital audio

through the digital output. Use this option if you have your receiver connected

to a digital surround ampliﬁer. The digital output can be switched off by setting

Digital Audio to Off.

Video Format: This setting is only active when the receiver is connected to the TV set via

HDMI. It allows you to set the preferred HDMI screen resolution. Available

options depend from your TV set.

Once all settings are made, press EXIT to leave the Output Options menu. A conﬁrmation banner will be

shown. Press OK to save your settings or EXIT to discard.

7.2.3 Time Setting

This menu allows you to set the way the receiver collects and adjusts the time. You can also adjust the Auto

Power Down function here. Use pq to highlight the setting you wish to change and tu or [0~9] to change

the value of the highlighted setting. Press OK for a list with all available options for the chosen setting.

Time Display: Deﬁnes when the front panel display will show the clock. Possible settings are:

Off and Stand-by only.

Use GMT: On: the receiver will use broadcast time. Use the Time Zone setting to deﬁne

the deviation from GMT time. Summer Time can be set to On or Off.

Use GMT: Off: Allows you to enter the time settings manually. Use the [0~9] buttons to set

the current time in the Local Time option. Use pq to move the highlight to

Local Date and press OK. A calendar will be displayed. Use pqtu to select

the actual date and press GREEN to conﬁrm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7300 CI plus Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7300 CI plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info