Bedienungsanleitung Strong srt 7335 hd (Seite 14 von 31) (Englisch)

424893

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

PART 1 • English

English

4.3 Dish adjustment

After selection of ASTRA1C,1E(19E) or HOT BIRD(13E) menu WIZARD-DISH ADJUSTMENT will appear.

Adjust your dish position in small steps until the signal strength and quality bars turn green or yellow.

Try to reach the maximum possible strength and quality level. Once you are sure the signal cannot be

improved, ﬁx the dish on this position and press

OK on your remote control to start the channel search.

After ﬁnished search, the ﬁrst programmed channel will be displayed on screen.

TIP: Depending from OSD language and satellite selected you may be prompted to select

preinstalled channel list. These channel lists include most popular channels ordered

according to the preference of most of the customers.

4.4 Channel set-up

If you select Other satellite then menu Channel set-up will be displayed on screen. Using pq buttons

select the Satellite item and press OK to display list of satellites. Use pq buttons to select satellite of

your choice and press OK. Using pq buttons select Dish number item and using tu buttons select

dish number and transponder, network search and channels which you want among All channels, FTA and

Scrambled in search for menu. Press OK in Dish number mode to set up Dish menu.

In Dish setup menu conﬁgure settings of the LNB, DiSEqC switch and Antenna mode. Please refer to

chapter 5.2.2 Dish set-up for detailed information. If you use ﬁxed dish, then press RED (Auto scan)

button on remote control to start channel search. If you use dish mounted on DiSEqC 1.2 or GOTO X

positioner then select Dish position item and press OK. If you use GOTO X positioner then GOTO X setup

menu will be displayed. Please refer to GOTO X setup description in chapter 5.2.4. After setting up dish

position, press RED (Auto scan) button on remote control to start channel search.

5.0 MAIN MENU

All the important settings and features of your receiver can be operated in Main Menu. The Main Menu

consists of six sub-menus: “Channel Organiser”, “Satellite Search”, “Installation”, “Timer”, “Application” and

“Common Interface” Press the MENU button when the menu is off, the MAIN MENU screen will appear.

5.1 Channel Organiser

In MAIN MENU screen, use pq buttons to select Channel Organiser, then press OK or u to enter the

Channel Organiser menu, which consists of the sub-menus Sort Channels, Add to Favourites and Edit Channels.

5.1.1 Sort Channels

In this menu, you can sort channels by order or move channels to speciﬁed position.

NOTE: Channels are sorted in the selected channel list only. Sorting of the channels in one list

do not change order of the channels in another list. I.e. sorting of the channels in list. “All

channels” do not change order of the channels in list of particular satellite and vice versa.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong srt 7335 hd Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong srt 7335 hd

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info