424893
20
Zoom out
Zoom in
Vorherige Seite
1/31
Nächste Seite
PART 1 • English
19
English
Power On Channel
Use tu to select an item. If your choice is Fixed channel: press OK button to display a channel list,
select a channel and confirm selection with
OK button. Your receiver will always start with defined
channel. If your choice is Last Viewed then receiver will awake with the last watched channel.
S/PDIF
Use tu buttons to select Digital audio mode. PCM – the receiver will downmix AC3 audio to PCM
stereo. Dolby – the receiver will by-pass AC3 audio for future decoding by Digital Audio Amplifier.
5.3.2 TV Setting
In this menu, you can configure the TV setting such as HD type, TV type, Aspect Ratio, Screen Control,
RGB/YUV, Brightness, Contrast, Saturation.
HD type
Use tu buttons to select an item. Or press OK button to display a list of options, use pq buttons to
select a video output resolution and press OK button to confirm selection.
TIP: HD type is not selectable if output mode (YUV/RGB) set to RGB.
TV Type
Use tu buttons to select an item. Or press OK button to display a list of options, use pq buttons to
select TV Type and press
OK button to confirm selection.
TIP: if you have changed TV type and Video on screen not appears in 15 seconds – press
EXIT button 2 times. Such a problem can appear if your TV do not supports video in
NTSC format.
Aspect Ratio
Set accordingly to aspect ratio of your TV.
Use tu buttons to select an item. Or press OK button to display a list of options, use pq buttons to
select Aspect Ratio and press OK button to confirm selection.
Screen Control
Use tu buttons to select an item. Or press OK button to display a list of options, use pq buttons to
select Aspect Conversion and press
OK button to confirm selection.
RGB/YUV
Selects a mode of video output signal.
If you have connected your TV to receiver only by SCART cable then it is recommended to set RGB mode. If
you have connected your TV to receiver by HDMI or Component cable then this value must be set to YUV.
Use tu buttons to select an item. Or press OK button to display a list of options, use pq buttons to
select YUV or RGB mode and press OK button to confirm selection.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong srt 7335 hd wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong srt 7335 hd

Strong srt 7335 hd Bedienungsanleitung - Deutsch - 31 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info