Bedienungsanleitung Strong SRT 7500 (Seite 8 von 20) (Englisch)

480572

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

PART 2 • English

English

23. FRW: No function

24. FF: No function

25. TIMERS: To access directly to timer menu

26. LIB: No function

27. PLAY: Used for media player function

28. STOP: Used for media player function

29. PAUSE: Used for media player function; in viewing mode access to zoom menu

30. RECORD: No function

2.4 DEFAULT PIN-CODE: 0000

3.0 CONNECTIONS

3.1 Connecting to Satellite Dish

Connecting a ﬁxed satellite dish to your receiver

Make your choice of which satellite you want to receive your signals from, and have your dealer aim your dish at the requested

satellite. Connect a coax cable to your LNB and the other end directly to the SAT IN connector of your receiver. (Fig. 4)

Connecting multiple ﬁxed dishes to your receiver using a DiSEqC 1.0 switch

If you want to watch programs from more than one satellite (For example from Astra and from HotBird) it is advisable

to use ﬁxed dishes and a DiSEqC 1.0 switch.

Have your Dealer aim the dishes at the requested satellites and connect the LNB with coax cables to the IN connectors

of the DiSEqC 1.0 switch. Connect the OUT connector of the DiSEqC 1.0 switch to the SAT IN connector at the back of

your receiver. (Fig. 5)

Connecting a dish on a motorized positioner to your receiver

Another possibility for watching programs from multiple satellites is by mounting a dish to a motorized DiSEqC

1.2 positioner.

Have your dealer mount the dish to the positioner, set the correct angle of the elevation and let him set the center point

for your positioner. Connect the LNB with a coax cable to the LNB IN connector of the positioner, and connect the OUT

connector of the positioner to the SAT IN connector at the back of your receiver. (Fig. 6)

3.2 Connecting to TV

Connecting by HDMI cable

To fully enjoy your HDTV channels it is advisable to connect your receiver via HDMI to your TV set. Connect one end of

HDMI cable to the HDMI output of your receiver and the other end of cable to HDMI IN connector on your TV. (Fig. 7)

Connecting by SCART cable

Connect the TV SCART connector at the back of the receiver to the SCART IN connector of your TV set. (Fig. 7)

3.3 Connecting to Digital Audio Ampliﬁer

Connect S/PDIF or Audio cinch connectors at the back of your receiver to the appropriate input of your Digital Audio

Ampliﬁer. For audio cinch connection use a cable with a TRS connector (audio jack) at the other end to connect to your

Digital Audio Ampliﬁer. (Fig. 7)

3.4 Connecting to computer by serial cable

This RS-232 connector on the back of your receiver is only used for service purpose. However, this receiver can

download new system software by OTA update from satellite.

4.0 STARTING UP FOR THE FIRST TIME

Ensure that your satellite receiver is correctly connected to your TV and dish and your satellite signal is of good quality.

Ask your local STRONG dealer to check your installation or satellite signal if you are not sure how to do this. Make sure

that the power plug of receiver is plugged into the wall outlet.

The language selection menu will be shown on your TV screen. It is recommended that you do ﬁrst time installation following

Installation Wizard step by step. It will help you to easily achieve system conﬁguration and channel installation.

4.1 Language Selection

Select the appropriate language with the pq buttons and press OK to conﬁrm selection. Then country selection

screen will be displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7500 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info