Bedienungsanleitung Strong SRT 7805 (Seite 18 von 25) (Englisch)

480571

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

PART 2 • English

English

7.5 Program Guide

The Program Guide menu allows you access (EPG) Electronic Programme Guide and to set Timers for

wakeup and/or recording.

Choose the desired sub menu with pq and press OK to advance.

7.5.1 EPG

The Electronic Programme Guide is a very useful function that allows you to watch programme schedules

and information on screen and to mark programs for recording. Find all detailed descriptions in chapter

6.6 EPG

Note: Availability of EPG data depends on the broadcaster.

7.5.2 Timers

Timers can be used to schedule recordings or to switch to a certain channel at a desired moment. It will

help you not to miss your favourite events. You can set up to 30 Timers.

Use pq to select one of the available timers. Press OK to advance. The Edit Timer screen will now

be displayed.

Use pq to switch between settings and tu or 0~9 to adjust the value of a setting.

Type: Choose between View, Record or None.

Channel: Press OK to display the channel list and use pq to select the wished channel

for this action.

Press TV/RAD button to switch between TV channel and Radio channel list.

Conﬁrm highlighted channel with OK button.

Title: Press OK if you want to give the Timer another name as “Manual Timer xx”.

Use the displayed keypad for insertion.

Repeat: Choose between Once, Daily, Weekly, Weekdays or Weekend.

Date: With repeat set to Once: press OK to display the calendar. Use pqtu to pick

the date for the recording and conﬁrm it with OK. Then press EXIT to apply the

date to the Timer setting.

With Repeat set to Weekly: Use tu to select the day of the week, at which you

want the timer to start.

Time: Press OK and use thetu or OK and pq to choose the hour. Use pq

buttons to enter the minute tu or OK and pq to choose the minute. Press

EXIT to leave the setting.

Duration: Use the 0~9 buttons to digit the duration of the timer if you have selected Record.

Once all settings are made, Press RED Save button to store these settings and press EXIT to leave the

Timer menu.

Delete a timer

In order to delete a set timer, select it with pq and press OK to select. Press BLUE Delete button to

delete and conﬁrm with OK.

8.0 OTA SOFTWARE UPGRADE

OTA automatic

The OTA (Over the Air) function automatically takes care that your receiver check if the latest software

is loaded.

Every time your receiver is switched to standby the OTA function will check for an improved software version.

After detection of a newer version, your receiver will display a message, after you switched it ON again.

Then you can download the new SW version. You can select OK to start the update immediately, or you

can select Cancel to start next time. Be aware that download takes around 20 minutes. You can skip the

update process only for ﬁve times, afterwards a forced download will be started.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7805 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info