Bedienungsanleitung Strong SRT 8200 (Seite 10 von 23) (Englisch)

480565

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

English

5.1 Changing channels

There are diﬀerent ways to change channels with your new receiver:

 Via direct access using the 0~9 buttons.

 Via the channel list through the OK button.

 Via the p/q or P+ and P buttons.

5.1.1 Direct access

To directly access a channel, simply enter its number with the 0~9 buttons on the remote control. Channel

numbers can be up to four digits long. Entering a number with less than four digits is possible. Just wait a few

seconds and your receiver will switch to the channel number or just press OK after inserting.

5.1.2 Channel list

Press OK in viewing mode to display the channel list. Use p/q in the list to highlight your preferred channel

and press OK to switch to this channel. To scroll to the next or previous 9 channels you can also use the P+/P

buttons. Using the t/u buttons allows you to toggle between the TV and radio channel list.

To directly change from TV to radio mode press the TV/R button.

By pressing the FAV button in viewing mode you can open the FAV group selection, if a favourite list has

been created. If more than one FAV list has been created then you can use the t/u buttons to toggle

between the diﬀerent FAV groups: Movies, News, Sports and Music.

5.1.3 Using p/q or P+/P-

p switches to the next channel.

q switches to the previous channel.

P+ switches to the next channel.

P switches to the previous channel.

5.2 Adjusting volume and audio

To adjust the volume you can use the V+/V or t/u buttons. To mute the audio output, use !, to enable

the audio output again, press ! again.

Some channels support a choice of diﬀerent audio formats and/or languages. To select another audio

language, press AUDIO in viewing mode. A list with available audio languages will be displayed. Use

p/q to select the desired language and conﬁrm with OK. The audio channel as stereo, mono left and

mono right can be selected with the t/u buttons.

5.3 Info Banner

Every time you switch to a channel, the info banner is displayed. While watching TV you can press the

button to display it again to access information about the current channel and event. Press

twice for

detailed programme and technical information.

5.3.1 Standard information banner

The following information will be provided:

 Channel number and name

 Current date and time

 Start and end time of the current event*

 Start and end time of the next event *

 Icons, showing the presence of additional services provided and some properties of this

channel:

— The channel is broadcasted in standard deﬁnition resolution.

— The channel is broadcast in high deﬁnition resolution.

— Green colour indicates the presence of Teletext.

— Green colour indicates the presence of DVB subtitles.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8200 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info