Bedienungsanleitung Strong SRT 8200 (Seite 14 von 23) (Englisch)

480565

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

English

6.2.2 Auto Search

After selecting this menu and pressing OK you will be asked to enter the PIN code DEFAULT PIN: 0000

in order to update the current channel list. If you don’t want to perform a full channel scan you can press

EXIT to cancel. After entering the PIN code DEFAULT PIN: 0000 the receiver will perform an automatic

channel search through all frequencies and after ﬁnishing this process it will update the channel list.

During the search process the receiver will display the progress bar, the currently scanned frequency and

the channel names. The receiver will add all new found channels to the channel list.

6.2.3 Manual search

In this menu you can search for channels on a speciﬁc frequency or channel. This menu requires

knowledge of some parameters in order to search on the correct channel/frequency in your area.

Scan mode: Use t/u to choose between By Channel and By Frequency.

If you set scan mode By Channel then following items are available:

Band: Use t/u to choose UHF (Ultra High Frequency) or VHF (Very High Frequency).

Frequency channel: Select a frequency channel on which you would like to search for the channels.

If you set scan mode By Frequency then following items are available:

Frequency: Use 09 to enter frequency on which you would like to search for channels.

Band: For the VHF frequency band commonly used 7 MHz, for UHF frequency 8 MHz is used.

The signal level and quality indicators will help you make sure you have signal on the selected frequency

channel or frequency entered, as well as to adjust the antenna, if necessary.

After you have entered the settings correctly you will need to select Search (directly above the signal bars)

and press OK. The receiver will start to search for the channels and if channels with your entered parameters

are available, they will be added to the channel list. If your search process does not deliver the desired result,

please contact the local service or check reliable websites/magazines if the entered values are correct.

6.3 System Setup

Press MENU and use t/u to select System Setup, then press OK. Following submenus will be displayed:

Language Setting, Output Setting, Time Setting, Auto Standby, Parental Guidance and Reset Factory default.

Use p/q to select a submenu and press OK or u to access.

6.3.1 Language Setting

In this menu you can set the preferred language for the menu, audio and subtitles.

OSD Language: Use t/u to select your preferred menu language.

Audio Language: Digital TV allows transmitting of more than one audio track/language. If a

channel carries multiple audio tracks/languages, the receiver will automatically

select the suitable audio track/language according to your selection.

Subtitle Language: This setting allows you to deﬁne the preferred language for subtitles. Use t/u

to select your preferred subtitle language and the receiver will automatically

display the subtitles this language (if available). If you do not want to display

subtitles, then set the setting to Oﬀ.

NOTE: Subtitles will be displayed when available. Availability depends on the local broadcast.

Please also consider that events can contain “built in” subtitles which can’t be disabled.

6.3.2 Output Setting

In this menu you can set the output parameters of the receiver according to the connected TV set and if

applicable for the connected audio ampliﬁer.

TV Mode: Use t/u to select your preferred mode. Commonly the PAL standard is used,

but it might be that you need to use the setting NTSC. We recommend referring

to the user manual of your TV set to check the correct setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8200 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info