Bedienungsanleitung Strong SRT 8203 (Seite 17 von 37) (Englisch)

751657

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

English

6.8 Teletext

Press TEXT in viewing mode to view the teletext.

Use the COLOUR BUTTONS (in accordance with the bottom of the videotext screen) to navigate

between pages or press 0-9 to enter the page number of the videotext.

Press EXIT to exit the teletext.

6.9 Usage of external USB devices

Your receiver is equipped with connectors for external USB storage device.

Connect a USB storage device to your receiver.

You will get a popup message “Has Found Storage Device” shortly.

When using external USB devices, it is necessary to follow below recommendations and to consider

some limitations:

Use USB devices compliant to USB 2.0 specification. If your USB device is not compatible with

this standard, the manufacturer cannot guarantee satisfactory operation of functions such as

multimedia playback or software upgrade.

Please ensure that the USB device is already formatted to FAT/FAT32 or NTFS. If it is not,

please format the USB device on the receiver or on your PC.

If you are going to use an external USB hard disk drive (HDD), please make sure that your

HDD power specifications do not exceed the supported output of your receiver (5V/500 mA).

If so, please use an additional external power adapter for this HDD.

STRONG cannot guarantee compatibility with all types of external USB storage devices.

IMPORTANT: It is advised not to store important information on the external USB device

used with the receiver. Always make backups of it before you use USB

devices with this receiver. STRONG will not take responsibility for any loss or

damage of information or circumstances caused by the loss of information.

6.10 Pause and Timeshift of broadcasted programme

The pause function allows you to get a still frame of the selected moment on your screen.

Press 2 if you want to freeze picture on the screen.

The programme will be paused. You will see still the picture with the pause symbol on it.

If you have not connected to your receiver to an external USB storage device, just press u or 2 again to

continue watching the broadcasted programme.

Otherwise, if the external USB storage device is connected, you could use the Timeshift function, which

allows you not to miss any interesting moments of a live broadcasted programme by pausing it and

resume playback later.

Press 2 if you need to go away for some time but want to resume watching the programme later from this

moment on. The programme will be paused. You will still see the picture with the pause symbol on it.

Your receiver will start recording the broadcasted programme to an external USB storage device from

the pause moment.

Press u to continue watching from the paused moment.

In this mode, the receiver will simultaneously playback the programme from the paused moment and

will continue recording of this programme from the broadcasting signal.

You could use 5 6 for fast forward and rewinding during the timeshifted playback.

Press 3 to exit the Timeshift mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8203 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info