Bedienungsanleitung Strong SRT 8203 (Seite 19 von 37) (Englisch)

751657

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

English

7.0 MAIN MENU

In the main menu you can manage channels, timers, perform installation of channels and specific

receiver settings, get access to multimedia and internet functions and get useful information about the

receiver, programmes, operator’s messages, etc.

To access the main menu, press MENU in viewing mode.

The main menu consists of six chapters (or sub-menus) and is organized horizontally as helpline on the

bottom of the screen with chapter icons.

An active chapter icon has a yellow background. The title of it is shown on the top of the screen.

Each chapter includes some items or parameters, which are presented at the centre of the screen area.

The main menu consists of following sub-menus: Installation, Channel, Preference, Settings, AV and Media

Center.

Use t u to select the required menu chapter.

Use pq or OK to enter the sub-menu and select items.

Press OK or u to enter the item or parameter of the sub-menus. Use OK to confirm the item definition.

Press EXIT to get back to the previous menu level or to close the main menu.

Press MENU to exit the main menu.

7.1 Installation

Press MENU and select Installation.

This chapter consists of the following sub-menus or parameters: Auto Search, Manual Search, Channel

Filter, Country, LCN and Active Antenna.

7.1.1 Auto Search

Search and install all channels automatically. This option overwrites all pre-set channels.

Select Auto Search and press OK or u to start the channel search.

To cancel the channel search, press EXIT.

7.1.2 Manual Search

Install new channels manually. This option adds new channels without changing the current channel list.

Select Manual Search and then press OK or u. The channel search screen will appear.

Channel No.: Select a channel that is known to carry a broadcast in your region. The Signal Strength

and Quality bars give a visual indication of the reception. Adjust your antenna to

obtain maximum signal strength and quality*

Frequency: Reference information about frequency for the selected frequency channel. Parameter

could be defined manually if you prefer to adjust antenna by frequency

Bandwidth: Reference information about bandwidth for the selected frequency channel.

Parameter could be defined manually if you prefer to adjust antenna by frequency/

bandwidth parameters

Beep: Select On for an audible indication of signal reception. Off (default) turns the beeper

off.

* Strength and Quality signal indicators will help you to make sure that you have signal on the selected frequency channel, as well as to

adjust your antenna if necessary.

When all settings have been made, select Start Search and press OK or u to start scanning.

The receiver will search this frequency only for all available channels.

Once scanning is finished, the receiver will store all found channels and switches to viewing mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8203 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info