Bedienungsanleitung Strong SRT 8525 (Seite 9 von 27) (Englisch)

480560

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

PART 2 • English

3.3 Connecting to TV with SCART cable

Fig. 6

The receiver is also equipped with a SCART connector; alternatively, the TV set can be connected to

the receiver using a good quality SCART cable.

3.4 Connecting to TV with cinch cable

Fig. 6

Your receiver is also equipped with Audio L, R and VIDEO connectors. As an alternative you can use

these connections if your TV set doesn’t have an HDMI connector.

3.5 Connecting to a digital audio ampliﬁer

Fig. 6

By connecting your receiver to a digital ampliﬁer or home theatre system, you can enjoy the best possible

sound quality and multi-channel audio (depending on broadcast). Connect your digital audio ampliﬁer or

home theatre system with a suitable cable to the S/PDIF connector on the back of the receiver.

3.6 Connecting to a digital A/V receiver and TV using HDMI

Fig. 7

By connecting your receiver to an A/V receiver or enhanced digital home theatre system with

HDMI, you will enjoy the best possible sound and picture quality as well as multi-channel audio

(depending on broadcast). Connect the HDMI output of the receiver to the corresponding input of

your A/V system and then connect the HDMI output of the A/V receiver or home theatre system to

your TV set. Select the correct input on your A/V system to watch and listen to programmes. If your

TV set already supports DD audio we recommend you to use the direct connection as described

above in chapter 3.2.

3.7 Connecting an external USB storage device

Fig. 6

NOTE: For details to consider when using a USB storage device please refer to

chapter 1.5.

4.0 STARTING UP FOR THE FIRST TIME

Ensure that your connections are setup properly. In case of diﬃculties or questions, please ask your

local dealer or service for assistance. It is recommended to follow the Installation Guide step by step.

It will guide you through the basic installation and channel searching process. It will enable you to

enjoy digital HD broadcasts just within a few minutes.

Start by selecting your language using t/u. After selecting your language, press q to move the

highlight to Region. Select your region with the t/u buttons.

Display Mode: Use t/u to switch the HDMI resolution to your value of choice. If

your TV set doesn’t support a speciﬁc resolution you will see black

picture, but to recover you can use t/u for switching to the next

or previous resolution.

Aspect Mode: Use this option to select the aspect ratio of your TV set and the

preferred conversion method. The options are: Auto (automatic

detection of aspect ratio), 4:3 Panscan (Displays 16:9 broadcasts

full screen and cut upper and lower parts of 16:9 video on your

4:3 TV), 4:3 letterbox (black bars on top and under the picture

on a 4:3 TV) and 16:9 Wide Screen or 16:9 PillarBox (Displays 4:3

broadcast with back pillars at left and right sides on your 16:9 TV)

which you can use for 16:9 TV sets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 8525 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info