Bedienungsanleitung Strong SRT24HB3003 (Seite 11 von 23) (Englisch)

751398

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Precautions for using the battery

Improper using of the battery will cause leakage. Carefully follow these instructions.

1. Please note the batteries' polarity to avoid short circuit.

2. When the battery's voltage is insufficient which affect the use range, you should replace it with

a new battery. Remove the batteries from the remote control unit if you do not intend to use it

for a long time.

3. Do not use different types of batteries (for example Manganese and Alkaline batteries) together.

4. Do not put the battery into fire, and charge or decompose the battery.

5. Please dispose batteries abide by relevant environmental protection regulation.

2.6 Using the remote control

 Use the remote control by pointing it towards the remote sensor. Items between the remote

control and the remote sensor could block normal operation.

 Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote

control, also do not put the remote control in a high humidity place.

 Do not place the remote control under direct sunlight which will cause deformation of the unit

by heat.

 When the remote sensor is under direct sunlight or strong lighting, the remote control will not

work. If so, please change the lighting or TV's position, or operate the remote control closer to

the remote sensor.

3.0 FIRST TIME INSTALLATION

After all connections have been properly made, switch on your TV. The language selection will appear

on screen. Use t u to select the OSD Language of your preference. Press q and then use t u to select

the country where you will use this TV. This is important to set settings as time zone and text character

correctly. Press q to change Environment from Home to Shop modus to demonstration TV in shop,

otherwise keep as it is.

Press ENTER for next step to go to Tuning setup.

In Tuner setup selection you select which tuner input source you like to use.

Tuner Type If you still have analogue signals in DVB-T or DVB-C. Select here between

options of Digital /+ Analogue systems.

Digital type Satellite to receive satellite broadcasts if you are equipped with a satellite

dish),

DVB-T to receive terrestrial broadcasts with indoor or outdoor antenna.

DVB-C to receive cable broadcasts if you have cable connection from local

provider.

Next step is depending of your choice in Tuner setup.

3.1 DVB-S/S2 installation

Satellite

Press q to select Satellite and use t u to highlight the satellite your dish is aimed at. Use pq t u to

highlight the options of choice and press ENTER to start the channel search.

Scan Mode Choose between Default (recommended), Blind Scan and Network

Channel type Select Free to search Free-To-Air channels only Free + Scrambled to search FTA

and Encrypted channels or Scramble to search Encrypted channels only.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT24HB3003 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT24HB3003

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info