Bedienungsanleitung Strong SRT5011 (Seite 5 von 20) (Englisch)

63367

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

PART 1 • English

1.0 INSTRUCTION

1.1 Safety Instructions

DO NOT INSTALL YOUR RECEIVER:

n In a closed or poorly ventilated cabinet; directly on top of or under any another

equipment; on a surface which might obstruct the ventilation slots

DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:

n To direct sunlight or near any other equipment that generates heat; to rain or intense

moisture; to intense vibration and to any shock which may cause permanent damage to

your receiver or to any magnetic objects, such as loudspeakers, transformers, etc.

n Do not use a damaged power cord. It may cause a ﬁre or an electrical shock. Do not

touch a power cord with wet hands. It may cause an electric shock.

n Never open the cover. It is dangerous to touch the inside of the receiver due to high

voltage currents and possible electrical hazards. Your warranty will be void if the receiver

has been opened.

n When the receiver is not used for a long period of time, you should unplug the power

cord from the wall socket.

n Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you

may clean your receiver with a soft lint-free cloth slightly made damp with a mild soap

solution, only after disconnecting from the mains voltage supply. Make sure no foreign

objects fall through the ventilation slots because this could cause ﬁre or an electric shock.

n Do not place any objects on top of the receiver because this might prevent proper cooling

of the components inside.

Safety Precautions

n Do not open the receiver cover, as you will be exposed to a shock hazard. It will also void

your warranty. Refer all maintenance or servicing to suitably qualiﬁed personnel

n When you are connecting the cables, be sure that the receiver is disconnected from the

mains supply voltage. Wait a few seconds after switching off the receiver before you move

the receiver or disconnect any equipment.

n It is a necessity that you only use an approved extension and compatible wiring that

is suitable for the electrical power consumption of the installed equipment. Please

ensure that the electrical power supply corresponds with the voltage on the electrical

identiﬁcation plate at the back of the receiver.

If the receiver does not operate normal even after strictly following the instructions of this user

manual, it is recommended to consult your dealer.

1.2 Storage

Your receiver and its accessories are stored and delivered in a packaging, protected against electric

damage and moisture. When unpacking, make sure all parts are included. Keep packaging away

from children. For transportation from one place to another or if you are returning the receiver

under warranty make sure it is repacked in its original packaging with all accessories. Failing to

comply with such packaging procedures could void your warranty.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT5011 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT5011

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info