63367
7
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
PART 1 • English
4
n RS-232 port for updating control software and additional services
1
subject of local broadcast condition
Accessories:
n User’s Manual
n 1 Remote control unit
n 2x Batteries (AAA type)
Note: The batteries should not be recharged, disassembled, electrically short-circuited or be
mixed or used with other types of batteries.
2.0 CONNECTION
2.1 Connecting to Terrestrial Antenna
Fig. 1
To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN
connector at the back of the receiver.
2.2 Connecting to TV and VCR with SCART cable
Fig. 1
The TV set should be connected with the receiver through a SCART cable. This terrestrial receiver
may also be operated together with a VCR using the loop through function. The loop-through
function of this terrestrial receiver is active when the receiver is in Stand-By mode. As soon as the
VCR is turned on, its video and audio signals are looped through the terrestrial receiver.
Optional: using coaxial cable, connect TO TV output of the receiver to aerial input of your VCR and
aerial output of VCR to aerial input of your TV set. This will allow you to watch and record analogue
aerial programs to your VCR.
2.3 Connecting to TV with RCA cable
Fig. 2
On the back of your receiver you will find the RCA connectors (Audio Left & Right - Red& white,
Video - Yellow). Install an audio/video cable between the RCA connectors of the receiver and those
of your TV set or amplifier.
2.4 Connecting to a Digital Audio Amplifier
Fig. 3
The Digital Audio Amplifier is connected with the receiver from the S/PDIF connector.
2.5 Connecting to PC
Fig. 4
The RS-232 connector on the receiver is to connect to the PC using a serial cable. This allows you to
download new versions of software to your receiver.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT5011 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Strong SRT5011

Strong SRT5011 Bedienungsanleitung - Deutsch - 21 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info