Bedienungsanleitung Strong SRT6020 (Seite 12 von 26) (Englisch)

65945

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

PART 1 • English

Transponder ﬁeld and select transponder by pressing LEFT/RIGHT button). Then choose

ﬁeld

Move Dish and adjust position of the dish by pressing the LEFT/RIGHT button.

Once you adjust the dish position choose Store position, set number of the position

by pressing LEFT/RIGHT button. Then choose NEXT and press the OK button. The

Channel Setup menu will appear.

3. Dish mounted on GOTO X motor

Set Antenna mode to GOTO X, choose NEXT and press the OK button. The menu Adjust

antenna will appear. Select transponder receivable at your location (choose Transponder ﬁeld

and select transponder by pressing LEFT/RIGHT buttons). Then choose ﬁeld My Longitude

and using numeric buttons enter value of your longitude. Use LEFT/RIGHT buttons to

select hemisphere East or West. Then choose ﬁeld My Latitude and using numeric buttons

enter value of your latitude. Use LEFT/RIGHT buttons to select hemisphere Nord or South.

Choose ﬁeld Goto Position and press OK. Your dish will be turned to the position of satellite.

Then choose NEXT and press the OK button. The Channel Setup menu will appear.

Choose NEXT and press the OK button to start the scan. When the scan is completed, the

receiver will save the services information automatically and exit to the normal play state.

5.0 MAIN MENU

All the important settings and features of your receiver can be operated in Main Menu. The Main

Menu consists of ﬁve sub-menus which are

“Channel Organizer”, “Installation”, “System setting”,

“Timer” and “SD Card”.

Press the MENU key when the menu is off, The MAIN MENU screen will appear.

5.1 Channel Organiser

In the MAIN MENU screen, press UP/DOWN to move the cursor to Channel Organiser, and

then press OK to enter the Channel Organiser menu, which consists of two sub-menus; “Channel

Manager” and “Favourites Manager”.

5.1.1 Channel Manager

In this menu, you can change the order of the channels, move, delete and edit channels. To change

the satellite use the RED button,

n Sort (GREEN buton)

You can sort the channel order in the channel list by “Name a~z”, “Name z~a”, “Free-CA”,

“Fav – NO Fav”

or “Default” type.

n Edit (YELLOW button)

Select the channel that you wish to edit, press the YELLOW (Edit) button to move into the

modify program menu. In this menu, you can modify the Program Name, Down Frequency,

Symbol rate, Video PID, Audio PID.

If you want to rename the channel, use the UP/DOWN keys to select “Program Name” and

press OK, the Program Name dialog will be shown.

Use the LEFT/RIGHT buttons to move the cursor to the character you wish to edit. Use the

UP/DOWN buttons to change character (scroll alphabet). If you wish to delete character you

have to replace it with “space” character. When editing is complete, press the OK button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT6020 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT6020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info