Bedienungsanleitung Strong SRT7840 (Seite 18 von 28) (Englisch)

750861

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

English

NOTE: If an SCR LNB is used, please refer to the manual of the respective LNB to obtain

technical data on user bands numbers and corresponding frequencies. SCR cannot

be combined with any other DiSEqC function. SCR can only work in combination

with an optional multi-output (max. 8) satellite splitter and an SCR LNB. SCR systems

are mainly installed by professional experts, who then assign the User Band and

Frequencies. If such a system is readily installed in your apartment block, refer to the

original installer or the maintenance department of the housing block.

The Signal Strength and Signal Quality of signal are displayed for convenientness while setting up, at the

bottom at the screen.

The following 3 options will only show when at Antenna Type the DiSEqC 1.2 option is selected.

Go To The receiver can save up to 64 different positions. First select one Position by pressing OK

button, then use Move by pressing the t u buttons to reach the correct satellite position.

Once the signal is strong enougt select Save Position to save this position.

Move Press t u to adjust the dish position according with the strength signal on the signal bars.

Save Position Press OK to save the Dish position.

8.1.2 Channel Search

Satellite: Select a satellite to be configured

Channel Type: Choose the kind of channel type you want to install. Available options: TV, Radio and

TV&Radio

Search Type: Set the search type. Available options: One transponder to store the programme of only

one transponder, tivùsat to store tivùsat programmes only, Free-To-Air to store Free-To-Air

programmes only, tivùsat +Free to air to store tivùsat and free to air programmes, All to store

all kind of programmes.

Transponder: Select the transponder belonging to the satellite selected. In case it has been

selected the option One transponder on Search Type the receiver will scan only the transponder selected.

Search: Press OK button to start the search.

8.1.3 Update tivùsat List

It useful to periodically check if a new programme list is available, provided by tivùsat on satellite.

8.1.4 Factory Reset

This option allows you to reset the receiver back to the factory settings, which also clears all stored channels.

You are asked to enter your PIN code. Enter the correct PIN code using the 0~9 buttons. A confirmation

window is displayed. Select OK to load factory settings. Select Cancel to cancel. Press EXIT to leave.

WARNING: By resetting your receiver to factory default, all your settings and stored channels

will be permanently deleted. Please use this option with caution.

8.1.5 Delete Browsing Data

Use this item to delete browsing data. At the end of the deletion process the receiver will restart automatically.

8.2 Channel

8.2.1 Electronic Programme Guide

This menu item opens the Electronic Programme Guide (EPG).

Use the navigational buttons and the buttons as indicated on screen to select a programme for recording. The

EPG information is maintained by the provider.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT7840 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT7840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info