Bedienungsanleitung Strong SRT8213 (Seite 24 von 28) (Englisch)

750859

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

NOTE: It is possible to use USB storage devices already formatted in NTFS.

*STRONG cannot guarantee the playback of les although extensions are listed, as it depends on codec, data bit rate and

resolution used (all MPEG codec formats are supported).

7.5 Network

The Network menu consists of the following submenus: RSS, Weather and IP Settings. Connect rst the

CAT5E (or better) cable into RJ-45ETHERNET port of your receiver and the other end into your router.

Before you can use the Internet functions you need to check the setup of the Internet connection in

the IP Settings menu. Use pq to highlight the menu of choice and press OK to enter. Press  to quit.

7.5.1 IP Settings

This menu allows you to setup or check the Internet connection. The default selection is DHCP set to

On. Normally the setup is done automatically by this. To test if the Internet connection works, select

the item SET and press OK. If successful, a pop-up message box will show up and you can start using

it. If not successful, then check your cable or router. Alternatively set DHCP to O. Then manually

enter your IP, Gateway and DNS values by using the 0~ 9 buttons. Select after entering these values

the item SET and press OK to store and to check.

7.5.2 RSS Feed (Really Simple Syndication)

This menu allows you to choose an RSS news link to read the latest news from dierent sources.

Use pq to highlight a link of your choice and press OK to enter. Select an item you want to read.

Press  to quit. Also you have option to delete, add or edit an RSS feed of your own choice. Press the

GREEN button Add RSS Feed to open the keyboard. Use pq tu to enter. If you need to use special

symbols press P+/P-. To save the created RSS link, select at the end Save and press OK.

7.5.3 Weather

This menu allows you to watch the weather in your region. Use pq to highlight the menu item

Weather from the Network menu. If you have correct Internet connection then the weather page will

show up with details on screen. Use the YELLOW button City List to open a selection list with main

cities.

Use pq to highlight a major city near you and press OK to select. You can enter a city manually. Press

the GREEN button Change City to open a keyboard. Use pq tu to enter. If you need to use special

symbols, press P+/P-. To save the name, select at the end Save and press OK.

7.6 Upgrade by USB

This feature allows you to update the receiver software via the USB port. When a new software is

available for your receiver, it can be downloaded from our website www.strong.tv.

Place the software le (unzipped) in the root directory of your USB storage device (HDD, memory

stick etc.) and connect the device to the USB port of the receiver. First a message box will appear that

a USB device is found. After a short time a message will appear on screen again with the message

New software available. Select OK to start download and update immediately. When ready, the unit

will reboot automatically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT8213 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT8213

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info