782757
12
Zoom out
Zoom in
Vorherige Seite
1/146
Nächste Seite
22
EN
21
Manual locking modes
4-way manual lock
The manual lock has 4 positions which control the opening of the flap in both directions,
allowing you to control the entry and exit of your cats.
The flap must be vertical before changing the rotary lock position.
Position 1 – Enter and exit
Standard operation position. Authorised
cats
are allowed to enter and all cats can exit.
Position 2 – Exit
only
All cats are allowed to exit the house, and all cats
are prevented from entering the house.
Position 3 – Enter only
Your authorised cats are allowed to enter, but are
prevented from exiting the house. This is useful if
you need to keep your cat inside eg. for a vet trip.
Position 4 – Fully locked
All cats are prevented from entering and exiting
the house.
Turning o the microchip reader
In the event that you want to turn o the microchip reader in your cat flap and revert to
using it as a standard cat flap, follow the three steps below:
Remove the battery
compartment cover
and press the 'Add
a Pet' button once.
The catch will open
and the indicator light
will flash, as the cat flap
starts Add a Pet mode.
Remove the batteries and replace
the cover. The catch will stay open
and your cat flap can now be used
as a standard cat flap.
1 2 3
It is important you keep your cat flap clean and tidy to ensure it continues to function reliably.
We recommend you give it a clean every couple of months to avoid the build up of excess
mud, dirt, or cat hair. This way you can avoid any reliability issues dirt build up can cause.
Areas to keep clean
The draught excluders
When cleaning your cat flap, also make sure to
remove any build up of cat hair from the draught excluders
surrounding the clear plastic door, as this can sometimes
block the sensors.
The floor of the tunnel
Operation of the sensors also relies on the reflectivity of the
tunnel floor. This therefore should also be kept reasonably
clean. We advise you clean the tunnel every 2 - 3 months or
if you notice dirt build up.
The sensors
The sensors that are used to detect your cat are located on the
ceiling the tunnel. If they become obscured by dirt or cat hair,
then there is a risk that your cat flap will not work correctly.
Obscured sensors may result in abnormal locking functions
that can lead to battery drainage. You should clean the sensors
every 2 - 3 months or if you notice dirt build up.
Product care
Problem with your product?
If you notice any physical problems with your cat flap, please do not attempt to fix these yourself.
Our customer care team are very friendly and happy to oer you assistance or provide servicing if
your product is damaged in any way. Please see the reverse page for the telephone number or for
more guidance, videos and customer help forums visit surepetcare.com/support
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für SureFlap Microchip Cat Flap - serie nr 2000000 plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info