Bedienungsanleitung SV Italia SAB Sophia (Seite 16 von 22) (Englisch, Italienisch)

628327

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Manuale Utente – User manual – Macchina caffè modello SOPHIA

ed 2014-01 – Pag 16 di 22

Con riserva di modifica - Specification subject to change

Continuous coffee dispensing

Starting from the STAND-BY state, press (for a time less than 5 seconds) and then release the “E” button

and the machine will start the delivery from the group which you pressed the button, activating the solenoid

valve and pump, the led of the pressed key will be on.

The display shows “Pouring Continuous”

To stop the dispensing, press any key of volumetric dose on the group that is in delivering, the dose will be

stopped and the machine turn back in STAND-BY mode and the leds result to be on.

Steam dispensing

The hot steam is dispensed from the steam wand.(fig. 1-5) by turning the steam handle (fig.1-1).

Caution: The wand becomes extremely hot during steaming and can cause burns. Do not touch !!

To avoid milk rests to dry on the wand, we strongly recommend to clean the wand with a humid non

abrasive cloth after every use. Pay attention during this operation: the wand becomes extremely hot during

steaming and can cause burns.

Setting

Programming is done on STAND-BY machine ready to operate, press “E” continuous/programming key and

keep it pressed for more than 5 seconds and check that all keyboards’ led are blinking.

The display shows “ Programming Select Within30s”

Press within 30 seconds (programming time-out) any of the keys related to the 4 programmable doses (A B

C D) or tea dose (F), the machine begin to dispense and the key “E” led remains light on together with the

key dose in programming. The display shows “Programming Espresso” or “Programming Tea Water”

When the desired quantity is reached, press any of the coffee keys or the tea/water key on the keyboard

related to the group under programming to stop the dispensation. The new dose value is memorized, at the

same time the led related to the programmed dose switched off, while the remaining leds light blinking, it is

possible now to proceed with the other doses’ programming without repeating the entering procedures.

The display shows “Programming Select Within30s””

Repeat the steps to program the other doses.

Note: By programming the touch pad on left side of the machine from operator side , the same quantities are

automatically set on the other touch pads.

If you want to program the other touch pad with different quantities, it is necessary to repeat the

programming sequences on the second touch pad.

To exit programming phase without waiting the 30 seconds time-out expiring, press “E” key.

During the programming of one group, the others groups and tea dispensations remain disabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

SV Italia SAB Sophia Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info