Bedienungsanleitung Switel BDT 650 (Seite 154 von 160) (Deutsch, Englisch, Französisch, Italienisch)

488802

154

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

- Several Base Stations -

154

13 Several Base Stations

The use of several base stations increases the range and, thus, the mobilit y of your

handsets. Your handsets can be registered on up to four different base stations in order to

increase the area in w hich the handsets can be used. BDT-650 base stations can be used

for this or base stations from other manufacturers, as long as the devices comply with the

GAP S tandard. All base stations require their own telephone line socket. The base stations

can be connected to telephone line sockets with the same call number and even to

connections with dif ferent call numbers.

13.1 Registering handsets on other base stations

Before being able t o make calls via several different base stations, the handset must be

registered on all the base stations to be used.

13.1.1 Registration on BDT-650 base stations

If you extend your telephone system by adding B DT-650 base stations, register your

BDT-650 handsets on all the other base stations. Handsets from other manufacturers can

also be registered (refer to Chapters 12.1.1 and 12.1.2).

13.1.2 Registering on base stations from other manufacturers

To register a BDT-650 handset on a base station from a d ifferent manufacturer, follow the

instructions in Chapter 12.1.3. Use the PIN code of the base station from the external

manufacturer for the registration.

13.2 Selecting a base station

You can use the handset t o manually select the base station to be used t o make calls. It is

also possible to define settings ensuring the handset automatically establishes a

connection with the bases stations within range. The handset t hen aut omatically registers

on the nearest base station. Calls in progress, however, cannot be transferred from one

base station to another. In order for the automatic transfer of the handsets from one base

station to anot her to w ork properly, t he r espective handset must be registered on all the

base stations via which calls should be taken and made.

Select the base stations via which you want to make calls manually or activate the

“automatic selection” function.

1. Press the Menu button

" and use the ( or ) button to select the

REGISTRATION menu. Confirm b y pressing the " but ton.

2. Select the

SEL BASE menu and confirm with the " button.

3. Select the base station to be used for future calls or select the “automatic

selection” function

AUTO.

Note: B ase stations which are available to which the

handset is already registered appear in the d isplay to

the left of t he number, identified by the

icon.

4. Confirm b y pressing the

" button.

5. The base station is then searched for and an acoustic signal is issued after a

few seconds. The handset is now registered and can be u sed for internal and

external calls.

AUUUUMUQ

BASE :1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Switel BDT 650 Seite 154

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info