Bedienungsanleitung Sygonix TX 1 (Seite 3 von 8) (Deutsch, Englisch, Holländisch, Französisch)

565043

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

The home technology brand for the entire house. More information at www.sygonix.com

Operating instructions

Room Thermostat “tx.1”, AP

Intended use

The product is intended to be used for regulating the temperature in living and ofﬁ ce

spaces.

Always observe the safety instructions and all other information included in these ope-

rating instructions!

Any other use than that described above may damage the product. Moreover, this

may give rise to hazards such as short-circuiting, ﬁ re, electric shock, etc. No part of the

product may be modiﬁ ed or converted!

This Product Meets Legal, National and European Requirements. All names of com-

Package Contents

• Room Thermostat

• Operating Instructions

Explanation of the Symbols

The lightning symbol indicates a health hazard, e.g. electric shock.

This symbol indicates speciﬁ c risks associated with handling, function and

use.

Safety Instructions

Read the complete operating manual carefully before using the product,

as it contains important information about the correct installation and

operation.

The warranty will be void in the event of damage caused by failure to ob-

serve these safety instructions! We do not assume any liability for any

consequential damage!

We do not assume any liability for material and personal damage caused

by improper use or non-compliance with the safety instructions! The

warranty will be void in such cases!

Caution!

This device should only be installed by people with relevant electro-tech-

nical knowledge and experience!

If it is installed improperly, you risk:

- Your own life;

- The life of the user of the electrical system.

If it is installed improperly, you risk severe damage to property, e.g. by ﬁ re.

Yo u face the risk of personal liability for people injury and material damage.

Contact an electrician!

• The unauthorised conversion and/or modiﬁ cation of the product is not al-

lowed for safety and approval reasons (CE).

• The product is not a toy and must be kept out of the reach of children! There

is a risk of a lethal electric shock!

• The product may only be operated on the mains voltage (see section “Tech-

nical Data”). Never try to operate the product at another voltage as this will

cause its destruction.

• This product is only to be installed and used in dry conditions indoors. The

product must not get damp or wet as this may damage it; danger of a fatal

electric shock!

• Do not use this product in rooms or under adverse ambient conditions

where combustible gases, vapours or dust are or may be present! There is a

risk of explosion!

• The product must not be exposed to extreme temperatures, strong vibra-

tions or heavy mechanical stress.

• If you have reason to assume that safe operation is no longer possible, dis-

connect the product immediately and secure it against inadvertent opera-

tion. After this, let an expert check the product.

It can be assumed that safe operation is no longer possible if:

- the product shows visible signs of damage,

- the product does not work at all or works poorly (ﬂ ickering light, leaking

smoke or a smell of burning, the light ﬂ ickers, audible cracking noises, dis-

colouration to the product or the adjacent surfaces.)

- the product was stored under unfavourable conditions

- it was exposed to heavy loads during transport

• Do not leave packaging material carelessly lying around since it could be-

come a dangerous plaything for children.

• In commercial institutions, the accident prevention regulations of the em-

ployer’s liability insurance association for electrical systems and operating

facilities are to be observed!

• If you have any questions that are not answered in this manual, please

contact our technical service or another specialist.

Preparations for Connection and Installation

• The device must be voltage-free during installation and connection.

Turn the power off and ensure that none of the poles is carrying a current by remo-

ving the electric circuit's fuse, or switching off at the circuit breaker. Secure it against

unauthorised reconnection, e.g., with a danger sign. In addition, switch off the ap-

propriate earth-leakage circuit breaker.

• Check that the mains cable is free of current e.g. with an appropriate tester.

• Choose a suitable place for installation. To ensure the thermostat functions without

fault, it must be installed so it is not close to heaters, windows, doors, etc. Also keep

the thermostat out of drafts.

Do not mount the thermostat behind furniture or curtains.

Because the exterior walls of a building are generally colder than the walls in the in-

terior of the building (depending on the building insulation), the thermostat should

not be mounted there.

Wall heaters work with air convection. Thus, warm air rises from the heater, cools

slowly and sinks back down on the other side of the room. Therefore, an ideal lo-

cation for installing the thermostat is on the wall opposite a heater; see ﬁ gure. The

ideal installation height for this purpose is approx. 1.5 m.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sygonix TX 1 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info