Bedienungsanleitung Tascam CD-200BT (Seite 13 von 32) (Englisch)

587253

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

TASCAM CD-200BT 13

2 – Names and functions of parts

4 PLAY MODE button

Press to change the playback mode.

The four playback modes are continuous, single, random

and program. (See “Playback modes” on page 18.)

CAUTION

The playback mode, playback area, and repeat settings can

be changed when the current source is Bluetooth, but these

settings have no effect on Bluetooth playback. Moreover,

when using Bluetooth the intro check function cannot be

used.

5 REPEAT button

Press to turn the repeat playback function ON/OFF. (See

“Repeat playback” on page 22.)

6 SOURCE SEL button

Change the current source in the following order. (See

“Selecting the audio to output (current source)” on page

16.)

Current source order

NOTE

AUX IN cannot be selected if nothing is connected to the

AUX IN jack.

7 PITCH button

Press this button to turn the CD playback pitch control

function ON/OFF. (See “Pitch control” on page 24.)

8 FOLDER g/t buttons

Use these buttons when the playback area is set to

FOLDER

to change the playback folder. (See “Setting the playback

folder” on page 20.)

Use these buttons when the playback area is set to

ALL

PLAY

to skip between folders.

9 m/. and //, buttons

Press briefly to select tracks (skip). Press and hold to search a

track.

0 OPEN/CLOSE button

Use to open and close the disc tray.

q DISPLAY button

Press to change how the time is shown and other infor-

mation. When this button is pressed, the type of information

currently displayed is shown for two seconds. Press the

button again during this time to change the type of infor-

mation shown. The information that can be shown depends

on the current source, type of disc and status of operation.

(See “Time and text information display” on page 23.) (See

“Bluetooth information display” on page 26.)

w PAIRING button

Press and hold this button to start Bluetooth pairing mode.

Press and hold this button when in pairing mode to end

pairing mode. (See “Pairing” on page 25.)

e PROGRAM EDIT button

Use to set, confirm and edit programs. (See “Programmed

playback” on page 20.)

r DEVICE SEL button

The name of the device connected (or ready to be

connected) by Bluetooth is shown for two seconds. Press

this button again during this time to change the device to

be connected by Bluetooth. (See “Searching for Bluetooth

devices” on page 25.)

t −/+ buttons

Use these adjust the pitch control value during CD playback.

(See “Pitch control” on page 24.)

y STOP button

Press this button to stop playback.

Press this button when editing a program to clear all items

added to the program. (See “Setting the program” on page

20.)

u PLAY/PAUSE button

Press during playback to pause. When playback is stopped or

paused, press to start playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-200BT Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info