Bedienungsanleitung Tascam CD-200SB (Seite 23 von 48) (Englisch)

587254

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

TASCAM CD-200SB

4 – Playback

Selecting a track

There are two ways to select a track. You can move (skip) to the

previous or next track, or you can select a track directly by its

track number.

Skipping to the next or previous track

Use the main unit SEARCH m/, [.//, SELECT 5/

b] buttons or the remote search (m/. [SELECT 5] and

//, [SELECT b]) buttons to skip to tracks.

After selecting the track, press the PLAY/PAUSE button on the

main unit or the remote control to start track playback.

NOTE

If you press the main unit SEARCH m/, [.//, SELECT

5/b] buttons or the remote search (m/. [SELECT 5]

and //, [SELECT b]) buttons during playback, playback

will resume after skipping tracks.

Selecting by track number

You can select tracks directly for playback by number. After

pressing the TRK SEL button on the main unit or the remote

control to light the TRK SEL indicator, use the number (1–10/0)

buttons on the main unit or the remote control to select tracks.

Track numbers can have up to two digits for audio CDs and up

to three digits for data CDs, SD cards and USB flash drives.

1. Press the TRK SEL button on the main unit or the remote

control to light the TRK SEL indicator on the main unit.

2. Use the main unit FOLDER/TRACK SELECT (1–10/0) buttons

or the remote number (1–10/0) buttons to input the track

number. Enter the track number starting from the largest

digit.

To select track 1:

Press the 1 button one time.

To select track 12:

Press the 1 button followed by the 2 button.

3. Press the PLAY/PAUSE button on the main unit or the

remote control. The selected track begins to play.

If you press the STOP button on the main unit or the remote

control, the display stops showing the track number input

and the display returns to its previous state.

NOTE

•

The highest track number that can be shown during

playback is 999.

---

will appear for track numbers higher

than 999.

•

When the playback area is set to

ALL PLAY

, use the

FOLDER g/t buttons on the main unit or the remote

control to skip between folders.

•

When in program or random mode, you cannot use the

number (1–10/0) buttons to select tracks.

•

To use the main unit FOLDER/TRACK SELECT (1–10/0)

buttons or the remote number (1–10/0) buttons for direct

folder selection, press the TRK SEL button on the main

unit or the remote control to make the main unit TRK SEL

indicator unlit.

Search forward and backward

You can search forward and backward in a track while

listening to it.

1 Play or pause the desired track.

2 Press and hold a SEARCH m/, [.//, SELECT 5/

b] button on the main unit or a search (m/. [SELECT

5] or //, [SELECT b]) button on the remote control

to start searching forward or backward.

3 Release the button that you are holding to stop searching

and return the unit to the state it was in before searching

(playback or pause).

NOTE

Audio files on data CDs, SD cards and USB flash drives can also

be searched forward and backward.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-200SB Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info