Bedienungsanleitung Tascam CD-200SB (Seite 26 von 48) (Englisch)

587254

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

TASCAM CD-200SB

4 – Playback

Checking the program

You can check the contents of the program.

1. Press the PROGRAM EDIT button on the remote control

while playback is stopped to put the unit into program

setting mode.

The track number and playback time of the track set as

program step 01 is shown on the screen and

PROG

blinks.

(Playback time is not displayed when using a data CD, SD

card or USB flash drive.)

Track number Playback time

2. Press the PROGRAM EDIT button to show the track infor-

mation of the next program step.

3. If you press the PROGRAM EDIT button when the final

program step is shown, it becomes possible to add another

program step. (No track number is shown and

PROG

blinks.)

4. Press the PROGRAM EDIT button again to exit the program

setting mode.

Replacing a program track

You can replace a track that has already been added to the

program.

1. Press the PROGRAM EDIT button on the remote control

while playback is stopped to put the unit into program

mode.

2. Follow the steps in “Checking the program” above and press

the PROGRAM EDIT button to show the program step with

the track that you want to replace.

3. Use the remote number (1–10/0) buttons or skip (m/.

[SELECT 5] and //, [SELECT b]) buttons to select

the desired track and press the PROGRAM EDIT button.

After replacing a track, the display shows the empty step at

the end of the program and you can add another track to

the end of the program if desired.

4. Press the PROGRAM EDIT button again to exit program

setting mode.

Adding more program tracks

You can add tracks to the end of an already set program.

1. Press the PROGRAM EDIT button on the remote control

while playback is stopped to activate program setting mode.

2. Press and hold the PROGRAM EDIT button until the empty

program step where it is possible to add a track appears. (No

track number is shown and

PROG

blinks.)

3. Use the remote number (1–10/0) buttons or skip (m/.

[SELECT 5] and //, [SELECT b]) buttons to select

the track to add and press the PROGRAM EDIT button.

4. In this state, you can repeat step 3 to add more tracks, or

you can press the PROGRAM EDIT button to exit program

setting mode.

CAUTION

•

Although tracks can be added to the end of a program and

tracks can be replaced with different tracks, tracks cannot

be inserted into the middle of a program.

•

If you want to insert a track into the middle of the program,

replace and add program tracks to alter the program

contents.

Clearing the program

You can clear the entire program that has been set.

1. Press the PROGRAM EDIT button on the remote control

while playback is stopped to activate program setting mode.

2. Press and hold the PROGRAM EDIT button until the empty

program step where it is possible to add a track appears. (No

track number is shown and

PROG

blinks.)

3. Press the remote STOP button.

-CLEAR-

appears on the display. After clearing completes,

program setting mode resumes with the empty program.

In addition to the above procedure, opening the disc tray or

removing the media also clears the program.

NOTE

•

CD programs are cleared when the disc tray is opened or the

current folder is changed.

•

SD card and USB flash drive programs are cleared when the

media is disconnected. Programs are also cleared when the

dubbing (copying) or folder erase function is used, when the

current folder is changed and when direct folder playback is

used in program playback mode (

PROG

indicator appears).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-200SB Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info