Bedienungsanleitung Tascam CD-RW900MKII (Seite 25 von 36) (Englisch)

587262

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

TASCAM CD-RW900MKII 25

5 − Recording

Full disc

If the disc becomes full during recording, the unit will automati-

cally insert a fade-out. For example: When recording a long

program, just before the end of the disc is reached, the unit starts

a fade-out over four seconds and the display will show Fade Out.

When the fade-out has finished, the display shows Disc

Full!. Press the STOP key to exit.

If the disc is a CD-RW, the final track can be erased, if required

(see “Erasing” on page 29) and the disc then finalized. If the disc

is a CD-R, it must be finalized prior to use (see “Finalizing” on

page 28).

Time display while recording

When in record or record ready mode, repeated presses of the

TIME key cycle through four different time modes:

•

Elapsed track time (no display light indication)

•

Remaining track time (REMAIN is lit in the display)

•

Elapsed disc time (TOTAL is lit in the display)

•

Remaining disc time (TOTAL and REMAIN are lit in the

display)

NOTE



As the unit enters record ready mode, the display

shows Now OPC (Optimum Power Control) occasion-

ally, as the unit prepares to record on the disc.

To adjust the level of the source, following the

guidelines in “Input selection” on page 24.

NOTE



The red “OVER” indicators on the meters should never

light. Unlike analog equipment, digital audio units

pro-duce extremely unpleasant sounds when distort-

ed, and there is no “headroom” after the 0 mark. If

recording digitally from a commercially-produced

CD, the volume set in the menu should be 0 dB. This

will maintain all the dynamic range of the source CD

without clipping. Only boost the signal if the source is

exceptionally quiet.

An analog signal input at nominal level, with no cut

or boost from the volume controls, is equivalent to a

reading of −16 dB on the meters.

4. Press the PLAY key to start recording.

Pressing the PAUSE key stands by recording tempo-

rarily. To restart recording, press the PAUSE key or

PL AY key again.

5. Press the STOP key to stop recording.

When recording stops, the display shows

PMA Writing (Program Memory Area) flashing

for a few seconds as the unit writes to the disc.

NOTE



When PMA Writing is shown on the display, all keys

are ignored.

To conﬁrm the total recording time, use the REC TIME

option in the SYSTEM sub-menu (see “Operation

basics” on page 16).

NOTE



Do not vibrate the unit or turn off the power when the

unit writes to the disc, otherwise, recording will fail.

Advanced recording

Fade-in and fade-out recording

At the beginning and end of recording, fade-in and fade-out

effects can be performed.

1. When stopped or when in recording standby mode,

set the operation using the following menu options

on the REC sub-menu (see “Operation basics” on

page 16).

FADE IN?

The length of the fade in to the normal level can be

set between 1 and 30 seconds in 1-second increments

(default setting: 3 seconds).

FADE OUT?

The length of the fade out into complete silence can be

set between 1 and 30 seconds in 1-second incre-ments

(default setting: 3 seconds).

The display shows Fade Out>XXs or Fade In>XXs.

2. In recording standby mode, press the FADER key on

the remote control.

Recording begins and the sound fades in. After the

preset fade-in time, the sound is at normal level.

3. During recording, press the FADER key on the

remote control when you wish to fade-out the sound.

Fade-out begins with Fade Out flashing on the

display then the unit enters recording standby mode.

4. Press the STOP key and the PMA writing will begin.

NOTE



Fade-in or fade-out function can be operated only by

pressing the FADER key on the remote control unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-RW900MKII Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info