Bedienungsanleitung Tascam CD-RW900MKII (Seite 27 von 36) (Englisch)

587262

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

TASCAM CD-RW900MKII 27

5 − Recording

Automatic track division

The trigger level can also be used to divide tracks if the A_

TRACK (auto track) function is enabled.

When this function is enabled, the unit automatically inserts a

track division in the recorded material.

To enable or disable automatic track division:

1. Use A_TRK option in the REC sub-menu to set the

mode on. The A.TRACK indicator at the top right of the

display lights.

2. Rotate and push the MULTI JOG dial to select and

enter the modes following:

DD (digital direct)

When recording digitally from MD, CD or DAT, this

mode detects a track boundary and divides the track.

However, when the DD mode is on, and if the analog

source or non-DAT/CD/MD digital connections are

detected, the track number will be incremented using

level detection, as set with the A_TRK LEVEL setting

as described here.

Time (Time track increment)

The track will be incremented when the time set prior

to recording using the menu item “A_TRK TIME?” has

passed (see “Operation basics” on page 16). The time

can be set between one minute and ten minutes in one

minute increments. The A.TRACK indicator blinks during

recording or when in record ready mode.

Level

When the sound level has dropped below the threshold

for more than two seconds, and sound has re-started, the

track will be divided.

Use A_TRK LEVEL option in the REC sub-menu. The

trigger level is set to -24dB to -72 dB.

A_LVL

At least

2 seconds

level

time

Track increment

Manually divide track

While recording is taking place, press the RECORD key. The

current track number is incremented by one.

For details of automatic track division while recording, see

“Automatic track division” on page 27.

NOTE



According to the “Red Book” (the speciﬁcation for

audio CDs), a track cannot be less than four seconds

in length, and there can be a maximum of 99 tracks

on an audio CD. Bear these limitations in mind when

adding track divisions.

This operation can not be applied while recording

track 99.

Rec mute function

The Rec mute function allows instant cut-off of the input signal,

and records four seconds of silence on the disc.

While recording is in progress, press the REC MUTE key on the

remote control.

The display shows the Rec Mute flashing, the meters stop display-

ing the current level and the monitored sound is cut.

After about four seconds, the unit enters record ready mode.

NOTE



This function is only available from the remote

control unit.

Restricting the number of tracks

When making a recording, it is possible to restrict the number of

tracks that nay be recorded at one time.

At any time within record or record ready mode, turn the

MULTI JOG dial to display the track numbers you want to

record.

The maximum number that can be entered is 99 tracks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-RW900MKII Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info