Bedienungsanleitung Tascam CD-RW901MKII (Seite 21 von 44) (Englisch)

587263

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

TASCAM CD-RW901MKII 21

4 − Playback operations

Timer playback

By using an external timer, you can set the CD-RW901MKII

to play the loaded disc automatically when the unit is turned

on by the timer.

1. First, plug the power cord of the CD-RW901MKII

into the power outlet of the timer.

2. Load a disc into the unit.

3. Switch the TIMER switch on PLAY to enable timer

function on for the desired deck.

When Timer playback has been turned on, the

timer icon lights up in the display.

NOTE



The indicator ﬂashes when a disc is not loaded into

the unit.

4. Set the timer to the desired time. Consult the

timer’s operation manual for details. At the set

time, the power to the CD-RW901MKII will be

turned on, and playback will automatically begin.

Timer indicator

Repeat playback

1. Press the REPEAT key to turn on the repeat mode.

In this mode, all the tracks on the disc are played

continuously. The display shows Repeat ON and the

indicator lights up REPEAT.

During playback, if the repeat mode is turned on,

playback continues as before, and when the last track

finishes, playback resumes from the first track.

If the repeat mode is turned on when the deck is

stopped, press the PL AY key to begin operation.

2. Press the REPEAT key again to turn off repeat

mode. Repeat OFF appears then the REPEAT indicator

turns off.

NOTE



Combining the repeat mode with the program,

Single-track playback and Random playback functions

will enable Program repeat, Single-track repeat and

Random repeat operations, respectively.

Settings for the repeat playback mode remain after

power is turned off, except the speciﬁed A-B section

(see “A to B repeat playback” on page 22).

EXT SYNC playback

In this mode, the unit will play back in synchronization

with the clock selected as digital input source (OPTICAL,

COAXIAL, AES/EBU).

When stopped, use the EXT SYNC option in the PLAY

sub-menu (see “Operation basics” on page 16) to set the

external synch playback mode on.

Select the input source for sync playback.

NOTE



When the EXT SYNC is on, and when the unit detects

a signal other than 44.1kHz, synchronization with the

clock of the selected digital input source may fail, and

EXT CLK Err! will be displayed. The audio playback may also

be affected.

If the selected digital input source is at 48kHz, using the 48k

Fs adjustment function allows the audio to be played back at

the correct pitch.

When stopped, and when in playback or playback ready

mode, press the SYNC REC key to turn the 48k Fs

adjustment function on or off. When the function is on, 48k

Fs Adj will be displayed.

The setting remains until the EXT SYNC function is set to off,

and even the power is turned off.

NOTE



When the 48k Fs Adjustment is on, and when the unit

detects a signal other than 48kHz, synchronization

with the clock of the selected digital input source may

fail. The audio playback may also be affected.

When the 48k Fs adjustment is on, the Pitch control

and Key control functions cannot be used.

The EXT SYNC playback function does not operate

with MP3 discs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CD-RW901MKII Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info