Bedienungsanleitung Tascam cdrw900 (Seite 17 von 32) (Englisch)

161727

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

1-Introduction

TASCAM CD-RW900 17

Playback modes

There are four different playback modes. The selected

mode will be indicated on the left of the display.

≠

Continuous playback mode (default setting): no indi-

cation lamp

≠

Single playback mode:

SINGLE

lamp is lit

≠

Program playback mode:

PROGRAM

red lamp is lit

≠

Random playback mode:

RANDOM

red lamp is lit

The playback mode can be selected using the PLAY

MODE key on the remote control unit. Pressing the key

changes the playback mode on the display in the fol-

lowing order:

Continue

Single

Program

Random

You can also select the playback mode using the PLAY

MODE option in the PLAY sub-menu (refer to “Opera-

tion basics” on page 14). Turning the MULTI JOG dial

clockwise changes the playback mode shown on the

display in the following order:

Mode>Cont

Mode>Single

Mode>Program

Mode>Random

Pressing the MENU key or pushing the MULTI JOG

dial returns to normal mode from the menu mode.

While the mode can be changed from any playback

mode, the explanation in this manual will assume the

user is starting from the Continuous mode.

NOTE

The selected playback mode remains after power is

turned off. However, the setting of program playback

mode will be deleted when power is turned off.

4−Playback operations

Single-track playback

This function enables playback of just a single track.

1 During stop, set the

Single

or the

Mode>Single

mode.

2 Use the SKIP key or the number keys (0~9) on

the remote control to select the desired track.

The MULTI JOG dial can be used to select the

track also.

3 Press the PLAY key to begin playback.

After the selected track nishes, playback stops.

Continuous playback

Programing is cancelled, and playback continuous in

the normal order.

1 During stop, set the

Continue

or the

Mode>Cont

mode.

2 Press the PLAY key to begin playback in order of

the track number.

Program playback

This function enables playback of selected tracks in any

desired order. Up to 99 tracks can be selected for pro-

gram playback.

1 During stop, set the

Program

or the

Mode>Program

mode.

2 Use the number keys (0~9) on the remote control

unit to select each desired track for program play-

back, then press the ENTER key.

You can also rotate the MULTI JOG dial to select

the track number and push to enter.

The track number will be entered into the program.

Repeat the above step 2 until the desired program is

completed. As the program is being created, the pro-

gram number and total program playing time is revised

on the display.

NOTE

If the CLEAR key is pressed, the programmed track will

be deleted from the last.

3 When program setting is completed, press the

PLAY key to begin playback of the tracks in the pro-

grammed order.

NOTE

≠

If the STOP key is pressed without rst pressing the

PLAY key, all the program data will be erased.

≠

During stop, if the playback mode is switched to an-

other, all the program data will be erased.

≠

The programmed play order is not memorized when

power is turned off.

≠

In this mode, if any track is not programed, the CD-

RW900 will not start playback.

≠

If an attempt is made to enter more than 100 pro-

gram steps, the message

PGM Full!

appears on the

display.

≠

If the total program playing time exceeds 999 min 59

sec, --- : -- appears on the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam cdrw900 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info