Bedienungsanleitung Tascam cdrw900 (Seite 18 von 32) (Englisch)

161727

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

18 TASCAM CD-RW900

NOTE

The indicator ashes when a disc is not loaded into the

unit.

4 Set the timer to the desired time. Consult the timer’

s operation manual for details. At the set time, the

power to the CD-RW900 will be turned on, and

playback will automatically begin.

Timer playback

By using an external timer, you can set the CD-RW900

to play the loaded disc automatically when the unit is

turned on by the timer.

1 First, plug the power cord of the CD-RW900 into the

power outlet of the timer.

2 Load a disc into the unit.

3 Switch the TIMER switch on PLAY to enable timer

function on for the desired deck.

When Timer playback has been turned on, the timer

icon lights up in the display.

Random playback

In this mode, the unit will play back all the tracks on the

disc in completely random order, regardless of track

number.

1 During stop, set the

Program

or the

Mode>Random

mode.

2 Press the PLAY key and random playback will be-

gin.

Even when power is turned off, the unit will remain in

Random mode.

Time display switching

When the TIME key on the front panel or the remote

control is pressed, the time display will switch through

several modes on the display.

≠

Elapsed track time (no display light indication)

≠

Remaining track time (

REMAIN

is lit in the display)

≠

Elapsed disc time (

TOTAL

is lit in the display)

≠

Remaining disc time (

TOTAL

and

REMAIN

are lit in

the display)

When stopped, the total recording time is shown, re-

gardless of the status of the

TOTAL

and

REMAIN

indi-

cators.

NOTE

≠

In program mode, pressing the TIME key displays

the elapsed and the remaining time of the whole

program.

≠

When playing an MP3 disc, elapsed track time is al-

ways displayed, and the TIME key cannot be used.

≠

For details on time display during recording, please

refer to “Time display while recording” in “Recording”

section on page 22.

≠

Even when power is turned off, the time display

mode setting is retained.

Repeat playback

1 Press the REPEAT key to turn on the repeat mode.

In this mode, all the tracks on the disc are played

continuously. The display shows

Repeat ON

and the

indicator lights up

REPEAT

During playback, if the repeat mode is turned on,

playback continues as before, and when the last

track nishes, playback resumes from the rst track.

If the repeat mode is turned on when the deck is

stopped, press the PLAY key to begin operation.

2 Press the REPEAT key again to turn off the repeat

mode.

Repeat OFF

appears then

REPEAT

indicator

turns off.

NOTE

≠

Combining the repeat mode with the program, Sin-

gle-track playback and Random playback functions

will enable Program repeat, Single-track repeat and

Random repeat operations, respectively.

≠

Settings of the repeat playback mode remain after

power is turned off, except the specied A-B section

(see “A-B repeat playback” on page 19).

NOTE

Timer indicator

4−Playback operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam cdrw900 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info