Bedienungsanleitung Tascam cdrw900 (Seite 26 von 32) (Englisch)

161727

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

26 TASCAM CD-RW900

Unfinalizing CD-RW discs

If a CD-RW disc has been nalized, it is possible to

erase the Table of Contents in the following way:

1 With the nalized disc loaded and the unit in stop

mode, press the ERASE/DEL key on the front panel

or the ERASE key on the remote control.

Rortate the MULTI JOG dial or press the SKIP keys

on the remote control to select

UNFINALIZE?

. Push

the MULTI JOG dial or press the ENTER key to

conrm.

If you do not want to proceed with the unnalizing

process, press the ERASE/DEL key on the front

panel or the SKIP keys on the remote control.

2 The display shows

Sure?

If you do not want to proceed with the unnalizing

process, press the STOP key.

3 To start the unnalizing process, press the MULTI

JOG dial or the ENTER key again.

When unnalization has been chosen, the display

shows the

Erase

ashing and the remaining time.

The unit starts counting down from a time shown on

the display.

4 When nalization has been nished successfully,

Complete

appears on the display, yet the

TOC

will

go off.

6-After recording

Finalizing

This section deals with the actions taken after record-

ing: nalizing for CD-R and CD-RW discs, and erase

operations for CD-RW discs.

Once nalized, CD-R discs are truly nal—no more can

be recorded on them. By contrast, CD-RW discs

can be “unnalized” using the CD-RW900, i.e. their

TOC can be deleted, and if there is space, further ma-

terial can be recorded on them. Even if the disc is full,

tracks can be erased following the unnalize process,

and new material can be recorded.

As has been explained earlier (“Finalizing” on page 7), in

order for a disc to become a standard CD, it must have

a Table of Contents (TOC) written to it. This process is

known as nalizing.

An unnalized disc can always be distinguished on the

CD-RW900 by the

TOC

indicator under the disc type on

the display being un-lit when the disc is inserted.

To nalize a disc:

1 Load the unnalized disc, and the unit in stop mode,

press the FINALIZE key.

The display shows

FINALIZE?

If you do not want to proceed with the nalizing

process, press the FINALIZE/INS key on the front

panel or the FINALIZE key on the remote control.

2 To start the nalizing process, push the MULTI JOG

dial or press the ENTER key on the remote control.

The display shows

Sure?

If you do not want to proceed with the nalizing pro-

cess, press the STOP key.

3 When nalization has been chosen, the display

shows the

TOC

ashing and the remaining time. The

unit starts counting down from a time shown on the

display.

4 When nalization has been nished successfully,

Complete

appears and the

TOC

will be lit on the

display.

NOTE

During the process of nalizing, any key operation is not

accepted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam cdrw900 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info