Bedienungsanleitung Tascam cdrw900 (Seite 28 von 32) (Englisch)

161727

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

28 TASCAM CD-RW900

Titles can be given to the disc and the tracks on the

disc, using the TEXT EDIT option on the TEXT sub-

menu.

NOTE

After the title is selected and entered on the disc, and

TOC lights up on the dis-play, if the power is turned off,

the TOC will not be recorded onto the disc, and the

titles will not be added.

Follow the guidelines below to input titles on the screen.

Operate them when in the text edit mode.

It is more efcient to connect a keyboard for title input (

refer to “Title input by keyboard” on page 29).

≠

Select the type of character for input

Press the DISPLAY key on the unit or the remote

control to select from two different types of charac-

ters.

Lower case letters/code: no indication

Capital letters/code: CAPS

≠

Input procedure

Rotate the MULTI JOG dial or the SKIP keys on the

remote control to get the desired characters on the

display.

Push the MULTI JOG dial or press the ENTER key

on the remote control to enter.

≠

To move the cursor position

Use the

∆

key and the

key on the front

panel, or the SEARCH key on the remote control.

≠

To delete characters

Place the cursor on the character, then press the

ERASE/DEL key on the front pane, or the ERASE

key on the remote control.

≠

To insert characters

Move the cursor to the location where you wish to

insert a character, and press the FINALIZE/INS key

on the front panel or the FINALIZE key on the re-

mote control.

≠

To change a character

Place the cursor on the character to be changed,

then input the desired character.

NOTE

≠

As with the TEXT menu, after the name is set, if

the disc is tried to eject without writing TOC on the

disc, the display will show

Sure?

Text!

. If you want

to eject the disc without TOC writing, press OPEN/

CLOSE key during the

Sure?

Text!

is shown on the

display. The text that have been edited or entered

will be erased.

≠

The disc or track title of the fainalized disc cannot be

edited. Unnalizing (CD-RW only) is needed to oper-

ate the title input function.

Title input operation

Disc title input

1 During stop, select the TEXT EDIT option in the

TEXT sub-menu (refer to “Operation basic” on page

14).

Text> Disc

will appear.

2 Press the MULTI JOG dial or the ENTER key on the

remote control.

Now, you can input or edit the disc title following the

guidelines above.

3 Press the MENU key to enter.

If you want to cancel, press the STOP key.

Track title input

1 During stop, select the TEXT EDIT option in the

TEXT sub-menu (refer to “Operation basic” on page

14).

2 Rotate the MULTI JOG dial or repeatedly press the

SKIP keys on the remote control to select the track

number you desire to title.

3 Push the MULTI JOG dial or press the ENTER key

on the remote control.

Now, you can input or edit the track title following

the guidelines above.

4 Press the MENU key to enter.

If you want to cancel, press the STOP key.

7−Titling

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam cdrw900 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info