Bedienungsanleitung Tascam CG-1800 (Seite 6 von 28) (Englisch)

587268

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

6 TASCAM CG-1800/CG-1000

1 – Introduction

Thank you very much for purchasing a TASCAM CG-1800/

CG-1000 Master Clock Generator.

Before using this unit, please read this manual thoroughly to

ensure you understand how to operate it correctly. We hope

that you will enjoy using this unit for many years.

After you have finished reading this Owner’s Manual, please

keep it in a convenient place for future reference. You can also

download a copy of this manual from the TEAC Global Site

(http://teac-global.com/).

Features

• Internal oscillation element uses a high-precision OCXO

(oven-controlled crystal oscillator), which is not affected by

environmental temperature

• Creating systems with even higher precision is possible

using an external input connector that supports 10MHz

• Jitter management circuit provide stable clock

• Glitch-free relocking circuit prevents noise and skipping

during clock dropouts and recovery

• Numerous output connectors, including 12 word clock

outputs, enable use even in large-scale video/audio

synchronization systems

• Supports input and output of a variety of video signal

formats, including NTSC, PAL and HD tri-level (CG-1800

only)

• AES3 and AES11 signals can also be used for external

master clock input sources

• Analyze function can measure output device termination

(CG-1800 only)

• Word clock output level adjustment function allows signals

to be provided to other devices at optimal levels

• Self-calibration function using an external oscillator

(atomic/GPS 10MHz, GPS PPS)*

• Word clock up to 192 kHz supported

• Supports 0.1% PULL UP/DOWN between 24F (Film) and

29.97F (NTSC) and 4% PULL UP/DOWN between 24F (Film)

and 25F (PAL) (CG-1800 only)

• Up to 4 system settings can be saved to buttons for recall,

and saved settings can be imported and exported via USB

• Tough nut-coupling BNC connectors made by Amphenol

• Construction uses independent circuit boards for each

connector to prevent contact failures due to twisting

• Three-prong inlet type power cable included

• Panel-lock switch to prevent misoperation

• 128x64-pixel organic EL display with a wide viewing angle

• Aluminum front panel that matches other studio

equipment

• Firmware updates possible using the USB port

• EIA 1U rackmount size

• RoHS-compliant

*Use of the self-calibration function requires preparation of

a separate PPS-output 10MHz oscillator with a built-in GPS

antenna.

Included items

This product includes the following items.

When opening the package, be careful to prevent damaging the

items. Keep the box and packing materials for transportation in

the future.

Please contact TASCAM if any of these items are missing or have

been damaged during transportation.

• Main unit ..............................................................................................× 1

• Power cord ...........................................................................................× 1

• Rackmount screw kit ........................................................................× 1

• Owner’s manual (this document) ................................................× 1

The warranty is included at the end of this manual.

Conventions used in this manual

The following conventions are used in this manual.

• Buttons, connectors and other physical parts of this unit are

written using a bold font like this: MENU button.

• Text displayed on the display of the unit appears like this:

REFERENCE

• The location highlighted (light on dark) on the display is

referred to as the “cursor” in some cases.

• The sampling frequency used for the audio clock is called

the "audio clock frequency".

• Additional information is provided as necessary in tips,

notes and cautions

TIP

These are tips about how to use the unit.

NOTE

These include additional explanations and special cases.

CAUTION

Failure to follow these instructions could result in injury,

equipment damage or lost data, for example.

Trademarks

• TASCAM is a trademark of TEAC Corporation, registered in

the U.S. and other countries.

• Other company names, product names and logos in this

document are the trademarks or registered trademarks of

their respective owners.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CG-1800 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info