Bedienungsanleitung Tascam CG-1800 (Seite 7 von 28) (Englisch)

587268

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

TASCAM CG-1800/CG-1000 7

1 – Introduction

Precautions for placement

• The guaranteed operating temperature of this unit is

between 0 ºC and 40 ºC (32 ºF and 104 ºF).

• Do not install the unit in the following types of places.

Doing so could degrade its performance or cause

malfunction.

Places with frequent vibrations

Near windows or other places exposed to direct sunlight

Near heaters or other extremely hot places

Extremely cold places

Places with high humidity or bad ventilation

Very dusty places

• To assure good heat dissipation, do not place anything on

top of the unit.

• Do not place this unit on top of any heat-generating device

such as a power amplifier.

Power supplies

• Insert the included power cord completely into the AC IN

connector.

• Connect the unit to the standard power outlet.

• Hold a power cord by its plug when connecting and

disconnecting it.

• When connecting two power supplies for power

redundancy, use separate power circuits that do not affect

each other.

Condensation

Condensation could occur if this unit is moved from a cold place

to a warm place, is used immediately after a cold room has

been heated or is otherwise exposed to a sudden temperature

change. If condensation occurs, leave the unit for one or two

hours before supplying power to it.

Cleaning the unit

To clean the unit, wipe it gently with a soft dry cloth. Do not

wipe the unit with chemical cleaning cloths, benzene, paint

thinner, alcohol or other chemical agents because they could

damage its surface or cause discoloration.

USB flash drives

USB flash drives can be used with this unit.

A list of USB flash drives that have been confirmed to operate

with this produce is available on the TEAC Global Site (http://

teac-global.com/).

Handling precautions

USB flash drives are made with precision.

In order to avoid damaging them, please observe the following

precautions when handling them.

• Do not leave them in places that are extremely hot or cold.

• Do not leave them in places that are extremely humid.

• Do not get them wet.

• Do not place objects on top of them or twist them.

• Do not subject them to strong impacts.

• Do not insert or remove them during data transfer or at

other times they are being accessed by the unit.

• When transporting them, put them inside cases or

otherwise cover them.

Using the TEAC Global Site

You can download the Owner’s Manual necessary for this unit

from the TEAC Global Site (http://teac-global.com/).

1. Open the TEAC Global Site (http://teac-global.com/).

2. In the TASCAM Downloads section, click the desired

language to open the Downloads website page for that

language.

NOTE

If the desired language does not appear, click Other

Languages.

3. Click the product name in the “Search by Model Name”

section to open the Downloads page for that product.

4. Select and download the Owner’s Manual that are needed.

User registration

Customers in the USA, please visit the TASCAM website (http://

tascam.com/) to register as a user online.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam CG-1800 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info