Bedienungsanleitung Tascam DM-3200 (Seite 11 von 120) (Englisch)

587270

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

1 – Introduction : Unpacking the DM-3200

TASCAM DM-3200 Owner’s Manual 11

Channel destinations There are 16 busses,

eight aux busses, 16 assignable inserts (not to be con-

fused with the “hard-wired” analog inserts on the

input pre-amps) as well as the stereo buss module.

Outputs from the channels can be assigned to these.

Furthermore, even when working at a sampling fre-

quency of 88.2 kHz or 96 kHz, the DM-3200 retains

the same number of channels and facilities as when

operating at “conventional” sampling frequencies.

Outputs The sources for the outputs (built-in and

optional slot) are then assigned to the actual physical

outputs.

Physical outputs available include the built-in TDIF

outputs (3 sets of eight outputs each), and eight chan-

nels of ADAT “lightpipe”, as well as two stereo digi-

tal and one stereo analog sets of outputs.

Since buss outputs can be assigned to the TDIF and

ADAT ports, this allows all the channels of a sur-

round mix to be recorded together.

The option slot cards typically provide outputs as

well as inputs.

Effects

The DM-3200 incorporates two high-quality digital

effects, including a digital reverb programmed by TC

Works.

Signals may be routed internally to these effects

using busses or aux sends, and the returns fed back to

mixer channels for inclusion in the mix. Alterna-

tively, the assignable inserts may be used to insert

and effect into the signal path of a channel module.

External effects can be looped through the assignable

analog sends and returns (the returns can then be

assigned to channels), or kept in the digital domain

by using the stereo digital I/O facilities.

In addition, channels 1 through 32 can use built-in

dynamic processors to provide compression or

expansion either pre- or post-fader.

Gates can be inserted at the inputs, with a wide range

of triggering options.

There are also analog inserts associated with each

mic/line input, which allow additional processors to

be inserted, before the DA converters. These insert

points can also be used to bypass the DM-3200’s

internal mic amps and patch in external mic amps.

Unpacking the DM-3200

The DM-3200’s box contains the items listed below.

When opening the package please be certain all the

items listed are included. If any items are missing,

please consult your TASCAM dealer.

• The DM-3200

•AC power cable

• A 32MB CF card, pre-formatted, and installed in

the card slot of the DM-3200.

• A USB cable

• A CD-ROM containing the utility software and

documentation for the DM-3200 (Windows and

Mac compatible).

•This manual

•The Quick Reference Guide

• Warranty card.

WARNING

The DM-3200 is a large and bulky piece of equipment.

We strongly suggest that you get someone to help you

lift it out of the carton and locate it in the position

where it will be used.

Lifting properly—When lifting, be sure of your footing

and grip. Bend your legs to get close to the DM-3200,

keeping your back straight, and then lift by straighten-

ing your legs. Hold the unit close to your body. Avoid

twisting or turning your body while lifting or carrying

the DM-3200.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DM-3200 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info