Bedienungsanleitung Tascam DM-3200 (Seite 12 von 120) (Englisch)

587270

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

1 – Introduction : About the manual

12 TASCAM DM-3200 Owner’s Manual

About the manual

Pushed controls on the DM-3200 are referred to as

“keys”.

Their virtual equivalents displayed on screen are

referred to as “buttons”.

Within this manual, the following typographic con-

ventions are used:

• The name of a control or connector on the unit is

written in the following way:

LINE/MIC.

• Messages and text shown on the display of the

DM-3200 are shown as follows:

DIGITAL IN 1.

• The name of a control or connector on another unit

is written in the following way: AUX IN.

What’s in the manual

1, “Introduction” (page 9) This section, pro-

viding an introduction to the DM-3200.

2, “Basic operational concepts” (page 16)

This is important—it gives you basic information on

the way in which you use the DM-3200’s controls

and menu systems, etc. as well as providing an expla-

nation of way in which the DM-3200 stores data.

3, “Connections” (page 38) Provides informa-

tion on how to connect the DM-3200 to other equip-

ment in your setup.

4, “Routing & assignment” (page 46) Since

the DM-3200 is a “soft” console, with many patches

and assignments made through software rather than

physical connections, you should read this section to

understand how the inputs and outputs of the DM-

3200, as well as the internal connections, are linked

together.

5, “Channel modules” (page 59) This sec-

tion describes the modules which form the basic

“building blocks” of the DM-3200. Most of the mix-

ing work you do on the DM-3200 will use the func-

tions described here.

This section also contains information on using the

DM-3200 in surround modes.

6, “Effects” (page 81) The parameters control-

ling the built-in effects of the DM-3200 are described

here and a list of the preset libraries may also be

found in this section.

7, “MIDI” (page 91) This provides information

on the MIDI capabilities provided by the DM-3200.

8, “Remote operation” (page 93) The DM-

3200 is capable of acting as a remote control unit for

a wide variety of external devices, including DAW

systems. This section explains how to use these capa-

bilities.

9, “Specifications” (page 102) Specifications

of the DM-3200, together with a guide to the popup

messages that appear on screen.

Also note that there are two separate publications in

addition to this manual and the printed Quick Refer-

ence Guide: these cover the automation features of

the DM-3200 and the TMCompanion software,

which are provided as electronic publications in PDF

format.

Notes and warnings

TIP

We give hints and tips on using the DM-3200 in this

way.

NOTE

These notes provide additional explanations for special

cases, etc.

CAUTION

Cautions show that you may lose data or performance

may suffer if the instructions are not followed.

WARNING

These warnings should be taken very seriously. They

describe situations which can cause injury, or damage to

equipment if the instructions are not followed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DM-3200 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info