Bedienungsanleitung Tascam DP-02CF (Seite 47 von 80) (Englisch)

617899

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

IMPORTANT SAFETY INSTRUCTIONS

TASCAM DP-02/DP-02CF 47

2 – Advanced techniques

You can rename the exported tracks on the PC, but you

should remember to keep to the “8.3” standard and the

.WAV extension and remember to limit the character to

letters of the alphabet (no accented characters or “odd”

punctuation, etc.).

You can import these tracks later to the same unit or to a

friend’s unit.

When you have finished mastering (see “Mastering” on

page 27), you may want to save the mastered stereo mix,

otherwise it will be overwritten when you next perform a

mastering operation.

Before you start this operation, make sure you have loaded

the song whose mastered mix you will be exporting (and

that it does indeed contain a stereo mastered mix).

1. From the MENU screen, select and enter the WAVE

menu.

2. Select the EXPORT MASTER action and press the ¥

cursor or YES/ENTER key.

The display shows a default file name for you to edit:

NOTE

If there is no mastered mix, the display will inform you.

3. Use the left and right cursor keys and the DATA dial

to name the exported mastered stereo mix (“Titling”

on page 11).

NOTE

Press NO/EXIT if you want to cancel the export opera-

tion.

4. When you’re done, press YES/ENTER to export

the mastered stereo mix (as a single 16-bit 44.1kHz

stereo WAV file).

The file is exported with the name you just entered, and a

.WAV extension.

5. Connect the unit to the computer and “open” the

recording media (““Open” and “Close”” on page

43).

6. Use the PC operating system to copy or move the

exported mastered mix file or files from the WAVE

directory of the unit FAT partition to the PC.

Once the file or files are on the PC, you can “close” the

unit.

Exporting the mastered stereo tracks

About track editing

One of the most useful features of a disk or memory-based

recorder such as this unit is the ability to edit material easi-

ly. When working with a stereo tape recorder in the past,

editing was not an easy process, and was very difficult to

undo if there were any mistakes. Multitrack editing was

nearly impossible!

The unit allows you to edit songs, copying and moving

material from one part of a song to another. This editing

is known as non-destructive editing, meaning that the

operation does not actually destroy data, and you can undo

mistaken or unwanted editing operations easily.

If you have ever used a word-processor on a computer, you

will probably find most of the unit’s editing operations

pretty simple. If you have never used a computer, the unit’

s editing operations are nothing to be scared of–just read

through this section to see how it all works.

NOTE

You can undo the editing operations described here

(see “Undoing/Redoing an operation” on page 25).

Even if you delete all the material on every track using

these functions, you can still get it back with only a

few key-presses.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-02CF Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DP-02CF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info