Bedienungsanleitung Tascam DP-02CF (Seite 49 von 80) (Englisch)

617899

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

IMPORTANT SAFETY INSTRUCTIONS

TASCAM DP-02/DP-02CF 49

2 – Advanced techniques

This function takes the section of a track or tracks marked

by the IN and OUT points, and moves it to the chosen track

or tracks, starting at the TO point.

After the operation, the selected section of the source

between the IN and OUT points is replaced by silence.

This operation overwrites anything which is already

recorded at the destination. The track is therefore the same

length as it was before the operation.

OUTIN TO

You can change the following values:

SOURCE.TRK This sets the source track or tracks from

which the section is taken. Choose 1 through 8 to select an

individual track. Choose 1/2, 3/4, 5/6 or 7/8 to select a pair

of tracks. Choose 1-8 to select all tracks.

DESTINATION. TRK This sets the destination track or

tracks to which the selected section is moved. What you

can select here depends on what you have selected for the

source track. If you have selected a single track, you can

select tracks 1 through 8 here. If you have selected a pair

of tracks (for instance, 1/2), you can only select track pairs

here. If you have selected all tracks (1-8), then 1-8 is the

only option available to you here.

Press YES/ENTER to perform the operation or NO/EXIT to

leave this screen.

MOVE ® PASTE

COPY ® INSERT

This function takes the section of a track or tracks marked

by the IN and OUT points, copies it, and inserts it on the

chosen track or tracks, as new material, starting at the TO

point.

The original source is left unchanged.

The insert operation adds the selected section as new mate-

rial to the destination. Nothing is overwritten at the desti-

nation, as any existing material following the TO point is

moved to the end of the newly-inserted section. The track

is now longer than it was before the operation.

You can copy the section more than once in one operation

(for example, to repeat a verse/chorus section).

OUTIN TO

You can change the following values:

SOURCE.TRK This sets the source track or tracks from

which the section is copied. Choose 1 through 8 to select

an individual track. Choose 1/2, 3/4, 5/6 or 7/8 etc. to select

a pair of tracks. Choose 1-8 to select all tracks.

DESTINATION. TRK This sets the destination track or

tracks into which the selected section is inserted. What you

can select here depends on what you have selected for the

source track. If you have selected a single track, you can

select tracks 1 through 8 here. If you have selected a pair

of tracks (for instance, 1/2), you can only select track pairs

here. If you have selected all tracks (1-8), then 1-8 is the

only option available to you here.

COPY TIMES This is the number of times that the select-

ed section is inserted (end-to-end) in the destination track

or tracks. You can set this value from 1 to 99.

Press YES/ENTER to perform the operation or NO/EXIT to

leave this screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-02CF Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DP-02CF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info