Bedienungsanleitung Tascam DP-03SD (Seite 38 von 76) (Englisch)

617896

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

38 TASCAM DP-03SD

7 – Recorder Functions

Punching in and out

Punching in/out is a technique to replace a part of an already

recorded track.

Start playback and when you reach the part that you want

to replace, switch to record (punch in), then switch back to

playback (or stop) when you finish the part that you want to

replace (punch out).

1 Decide what part of the track you plan to replace and choose

a point to begin where the new recording can sit well with

the existing recording.

2 Press the REC button of the track that you plan to replace

part of to start record standby (REC indicator blinks).

3 Start playback before the part of the track that you want to

replace.

4 Press the RECORD (–) button to start recording (punch

in) when you reach the part. Play or sing what you want to

record.

5 Press the PL AY (Á) button to switch to playback (punch

out) when you finish the replacement recording.

NOTE

When the recording source is set to a built-in microphone

(INTERNAL MIC A/B), the sound of pressing a button to

punch in and out could be recorded. This can be avoided

by using a foot switch to punch in and out or the automatic

punching in and out functions. (See “Automatically punching

in and out” on page 43.)

TIP

You can also press the STOP (ª) key to punch out at the end

of the replacement recording.

Using the foot switch to punch in/out

Using a foot switch connected to the REMOTE jack on the rear

panel, you can punch in and out.

In step 4 above, step on the foot switch instead of pressing the

RECORD (–) button. In step 5, step on the foot switch again

instead of pressing the PLAY (Á) button.

Foot switch

TASCAM RC-3F (optional)

NOTE

Press the switch (pedal) that you have set to

PUNCH

in the

foot switch settings. By default, the center pedal (Foot SW

C) is set to

PUNCH

. (See “Setting the foot switch” on page

38.)

Setting the foot switch

Set the foot switch on the

PREFERENCE

screen.

1 When the recorder is stopped, press the MENU button to

open the

screen.

2 Use the DATA wheel to select

PREFERENCE

, and press

the F4 (¥) button to open the

PREFERENCE

screen.

3 Use the F3 (§) and F4 (¶) buttons to select

FootSW L

4 Use the DATA wheel to select the function to assign to the

left foot switch pedal.

5 In the same way, use the

Foot SW C

item to set the

function of the center pedal and the

Foot SW R

item to

set the function of the right pedal.

6 After making the settings, press the HOME button to return

to the Home Screen.

Setting Function

PLAY

Same as the unit’s PL AY (Á) button

REC

Same as the unit’s RECORD (–) button

STOP

Same as the unit’s STOP (ª) button

F FWD

Same as the unit’s F FWD () (TO LAST REC)

button

REW Same as the unit’s REW (Ô) (TO ZERO) button

PUNCH

Press during playback to PUNCH IN and during

recording to PUNCH OUT

PLY/STP

Press when stopped to start playback, and press

at any other time to stop

CUE Locate to the last point where playback started

Default values:

CUE

(L),

PUNCH

(C),

PLY/STP

(R)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-03SD Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info